Domette Interlining

Definition and Overview

Domette interlining is an interlining used inside garments to add thickness and fullness. Rather than firmly fixing the shape of the outer fabric, it uses a soft cushioning feel to create natural volume around areas such as collars and shoulders. Domette is not a material name, but a term used to refer to interlining with this kind of texture and application.

Unlike fusible interlining, which is coated with adhesive resin and bonded to the outer fabric, domette interlining is often used by sewing it in, and is treated as a type of non fusible interlining. However, bonding capability and structure vary by product, so check the specification sheet and the actual sample.

Areas of Use and Role

The main areas of use are collars, front facings, shoulder areas, and sleeve heads in jackets and coats. In collars, it adds thickness and gives the turn a fuller look; in front facings, it stabilizes the parts with buttons and buttonholes. It may also be used as a component in shoulder pads and sleeve head wadding, smoothing the transition from the shoulder line to the sleeve.

In quilt products, it can be used between the outer fabric and lining to add loft. However, its role differs from quilt batting, which is primarily for warmth. Domette interlining also helps shape parts and soften pressure marks, so it may be used only in specific areas as needed.

• Adding thickness and expressing the turn of collars
• Reinforcing front facings and adding loft
• Forming roundness in the shoulder area and sleeve heads
• Adding bulk to quilt products

Materials and Types

Domette interlining includes products containing natural fibers such as cotton and wool, as well as those made with synthetic fibers or combinations of multiple materials. There are also woven, nonwoven, and structures combined with haircloth interlining, and even with the same name there are differences in thickness, density, resistance to compression, and surface fuzziness.

Thin types are less likely to become overly stiff even when layered, making them suitable for collars and front facings. Thick types make it easier to create volume, but seam allowances at overlapped areas become thicker. In specifications used together with haircloth interlining, domette interlining may provide soft body, while the haircloth interlining supports the shape.

Selection and Notes on Bonding and Sewing

When selecting, check the outer fabric’s thickness, firmness, texture, nap, and balance with the intended shape. If a firm interlining is paired with a thin, drapey outer fabric, the outline or step of the interlining may show through the surface. Even with a thick outer fabric, choosing domette interlining that is too thick can make collar points and front edges bulky, so evaluate it in the layered state.

Before cutting, check the grain line and whether there is any shrinkage, and if necessary perform pre-treatment such as boiling water treatment. In sewing, test the needle, thread, presser foot pressure, and sewing sequence so that stitches do not become uneven at thick intersections or leave presser marks or fading. If a fusible type is used together, confirm the appearance and bonding condition with a press test that includes the outer fabric.

Frequently Asked Questions