ApparelX is a global B2B marketplace for fabrics and apparel materials.

Multiple shopping bags are now available Details

111-381 Rayon Picot Braid Approx. 6 Mm[Ribbons, Tapes, And Cords] DARIN

111-381

Rayon Picot Braid Approx. 6 Mm

ApparelX ID:1001275

There are no reviews yet.

This is a rayon braid. It has picot edges on both sides for a cute look.
* Please note that cut lengths are available up to 10 m only.
* If you order by the roll, you can purchase it at half the unit price of meter cuts.

Brand / Manufacturer:DARIN

Supplier:Okura Shoji Co., Ltd.

Color:Please select

Stock Status(*):Displayed after account registration

Per Meter(M)

Qty.

Ask About This Product

Unit

* You can select a unit:

Meter

Roll

Color

Please select a color:

000

Off White

001

White

006

009

Black

011

015

016

025

033

Discontinued

035

Discontinued

041

051

Discontinued

053

055

061

Discontinued

065

Discontinued

081

Discontinued

148

Order Remarks

Add a note for the supplier or for your own reference:

Enter Order Remarks

Product Description

Category	Ribbons, Tapes, And Cords
Subcategory	Braid
Style	For Bags, For Costumes/dresses, For Formal Wear, For Interiors, For Jackets/Suits, For Outerwear/blousons/coats, For Pants, For Shirts/blouses, For Skirts And Dresses


Specification	1 roll, 50 m roll Width approx. 6 mm (including picot part)
Material	100% rayon CV
Brand / Manufacturer	DARIN
Mailbox Delivery	Possible
Registration Date	2019/01/16

Share This Item

FAQ

Frequently asked questions about this product:

Can tassel finishing be applied to cords?

Tassel finishing is possible using cords. It can be done simply by untying the cord, or by attaching a separate thin cord to the cord end. Since this is manual processing, a separate quote is required. Please contact us via the support page for details.

・Product number
・An image of the desired look, or an image showing the length, etc., if handwritten
・Planned quantity

What materials can be heat cut?

For synthetic fibers (polyester, nylon, acrylic, polypropylene, etc.), heat cutting is possible.
For natural fibers (cotton, linen, silk, etc.), heat cutting cannot be used because they will burn or char, so only scissors cutting is possible.
Even with synthetic fibers, extra-thick twist cord may not fuse properly, so please be careful.

Is logo printing possible?

Printing is possible depending on the material.
For details, please contact us here.

Is it possible to specify an angled cut edge for heat cutting?

Angled cutting is possible, but since it is done by hand, there may be a deviation of a few degrees.
Please specify 45° diagonally, etc. when placing your order.

What do 7×7 mm and 9×9 mm mean in the width notation for binder tape and knit tape?

This width specification has a groove in the center and is used by sandwiching textile, etc.
In the case of 7×7 mm, it becomes 7 mm when folded in half.

Is it possible to have tape or cord cut one by one to the specified length?

Yes, that is possible. Please select either scissor cutting or heat cutting from the options on each product page and enter the quantity.
Please write your desired length in the notes section at that time.
Since cutting always results in some cutting loss, if the number of cuts is large, it may not be possible to cut all of them from the number of rolls you ordered.
In that case, our order staff will contact you to confirm whether to cut as much as possible from the number of rolls ordered or to add more quantity.