ApparelX is a global B2B marketplace for fabrics and apparel materials.

Multiple shopping bags are now available Details

116-8311

Polyester Accordion Cord Approx. 2mm

ApparelX ID:1001635

There are no reviews yet.

This is a bellows cord approximately 2 mm wide.

*Please note that orders of less than 1 roll or 11 m or more are not accepted.
*If you order by the roll, you can purchase it at half the unit price of a cut-by-meter order.

Brand / Manufacturer:DARIN

Supplier:Okura Shoji Co., Ltd.

Color:Please select

Option:Possible to select

Stock Status(*):Displayed after account registration

Per Meter(M)

Qty.

Ask About This Product

Unit

* You can select a unit:

Meter

Roll

Color

Please select a color:

000

001

009

011

015

025

033

045

053

106

107

141

142

143

150

156

Order Remarks

Add a note for the supplier or for your own reference:

Enter Order Remarks

Option

You can select options below:

Heat Cut

Please select this when heat-cutting ribbons, tape, and cords. ① Enter the quantity after cutting (for example, if heat-cutting a 10-meter item into 1-meter lengths, enter 10). ② Write the cut length in the memo field (e.g., 30 cm). *Because mid-roll breaks or other issues may occur, we may not be able to cut exactly the quantity ordered. Please order about 10% extra in advance.

Standard Lead Time:5Days

Per Piece(P)

Enter Quantity

Enter Memo

Product Description

Category	Ribbons, Tapes, And Cords
Subcategory	Cord
Gender	Women's
Style	For Costumes/dresses, For Pants, For Shirts/blouses, For Skirts And Dresses


Specification	Width approx. 2 mm 50 m roll
Material	100% polyester E
Brand / Manufacturer	DARIN
Mailbox Delivery	Possible
Registration Date	2020/05/11

Share This Item

FAQ

Frequently asked questions about this product:

Can tassel finishing be applied to cords?

Tassel finishing is possible using cords. It can be done simply by untying the cord, or by attaching a separate thin cord to the cord end. Since this is manual processing, a separate quote is required. Please contact us via the support page for details.

・Product number
・An image of the desired look, or an image showing the length, etc., if handwritten
・Planned quantity

What materials can be heat cut?

For synthetic fibers (polyester, nylon, acrylic, polypropylene, etc.), heat cutting is possible.
For natural fibers (cotton, linen, silk, etc.), heat cutting cannot be used because they will burn or char, so only scissors cutting is possible.
Even with synthetic fibers, extra-thick twist cord may not fuse properly, so please be careful.

Is logo printing possible?

Printing is possible depending on the material.
For details, please contact us here.

Is it possible to specify an angled cut edge for heat cutting?

Angled cutting is possible, but since it is done by hand, there may be a deviation of a few degrees.
Please specify 45° diagonally, etc. when placing your order.

What do 7×7 mm and 9×9 mm mean in the width notation for binder tape and knit tape?

This width specification has a groove in the center and is used by sandwiching textile, etc.
In the case of 7×7 mm, it becomes 7 mm when folded in half.

Is it possible to have tape or cord cut one by one to the specified length?

Yes, that is possible. Please select either scissor cutting or heat cutting from the options on each product page and enter the quantity.
Please write your desired length in the notes section at that time.
Since cutting always results in some cutting loss, if the number of cuts is large, it may not be possible to cut all of them from the number of rolls you ordered.
In that case, our order staff will contact you to confirm whether to cut as much as possible from the number of rolls ordered or to add more quantity.