ApparelX is B2B e-commerce site for the apparel industry.

NP-PR Cap Snap Button Legs[Press Fastener/ Eyelet Washer] Morito

NP-PR

Cap Snap Button Legs

ApparelX ID:1019935

This product is scheduled to be discontinued. Once the current stock runs out, there is a possibility that no further production will be carried out.

Customers wishing to place an order are requested to inquire about stock availability before ordering.
The alternative product / substitute product is W2 JEANS RIVET
Rivet legs (W2-11/O (11mm))

Please use this.
These are legs designed to be used with the cap snap button top (product number : NP-1, NP-GHQ).
You can securely attach the top and legs to the textile by sandwiching them between the textile and hammering them in.

Maker:Morito

Supplier:

Color:Please select

Stock Status(*):Displayed after account registration

*Before taxes

Qty.

Inquiry About This Item

Unit

* You can select a unit:

Color

Please select a color:

PWP/YLO

Order Remarks

You can write a memo for the supplier, or yourself:

Enter Order Remarks

Item Description

This product is scheduled to be discontinued. Once the current stock runs out, there is a possibility that no further production will be carried out.

Customers wishing to place an order are requested to inquire about stock availability before ordering.
The alternative product / substitute product is W2 JEANS RIVET
Rivet legs (W2-11/O (11mm))

The color is only one color of PWP / YLO in the photo.

* Purchase of 100 or more will reduce the price.

*This product is the legs for the cap snap button, so please make sure to purchase the cap snap button Top as a set. Please see the related products below. (product number: NP-1, NP-GHQ)

Category	Press Fastener/ Eyelet Washer
Subcategory	Press Fastener
Gender	Unisex
Use Applications	General Purpose
Tag	Scheduled To Be Discontinued


Maker	Morito

Share This Item

FAQ

Regarding this item, there are the following FAQ:

How to repair a MORITO bridge (re-tightening the internal bolts / video included)

If the center of the piece is floating,
The internal bolts may be loose.
This may be resolved by retightening the screws with a hex wrench.
For detailed instructions, please refer to the video in the attached URL.
https://www.apparelx.jp/videos/IMG_0765.mp4

Which tool should I choose for Morito's press fastener and eyelet washer ?

Moritohand press NO.45 or hand press small NO.PM-1 .
Morito snap fastener installation tool be used in both.

Can I repair or replace the beaten pieces?

Since the hammer is a consumable item, basically we do not accept repairs or replacements due to deterioration or damage of the elastic band due to aged deterioration other than initial defects.
I'm very sorry, but I would like to request a replacement.
*In order to delay the deterioration of the elastic band over time and make it last longer, immediately return it to the bag and box in which it was used after use.

Where should I put the eyelet washer button seal?

It will be between the washer and the cloth

Is button seal necessary for press fastener and eyelet washer ?

In the case of thin textile , we recommend using button seal to prevent the textile from tearing or falling out while repeatedly putting on and taking off.
In the case of thick textile such as leather, it may not be possible to enter and hit, so please check the sample before considering.

NP-PR Cap Snap Button Legs

Unit

Size

Color

Extension Key

Stock List

Order Remarks

Option

Item Description

FAQ

General Notes

Reviews

Related Items

Items checked by persons who checked this item

Items from the same category

Items from the same maker

NP-PR

Cap Snap Button Legs