ApparelX is a global B2B marketplace for fabrics and apparel materials.

Multiple shopping bags are now available Details

This item is discontinued.

You can not purchase this item. You can check the successor item information at Description Section or Related Item Section.

MS-5200 Water-soluble Interlining For Shirts[Interfacing] KARANINGYO

MS-5200
Manufacturer Will Be Discontinued

Water-soluble Interlining For Shirts

ApparelX ID:1076794

There are no reviews yet.

non fusible interlining 5200 is temporarily fusible interlining areas carrying the complete water-soluble adhesive resin that is soluble in water. When washing or washing the product, the resin will run off and become a non fusible interlining. To become a similar handling and fusible interlining areas, and support the sewing.

This product is scheduled to be discontinued as long as it is in stock by the manufacturer.
As soon as the manufacturer's stock runs out, we may not carry out additional production.
Please note that the item may be out of stock at the time of ordering.
Please contact us from the support page for stock status etc.

Brand / Manufacturer:KARANINGYO

Supplier:Okura Shoji Co., Ltd.

Color:Please select

Stock Status(*):Displayed after account registration

Per Meter(M)

Qty.

Ask About This Product

Color

Please select a color:

Off White

Bleached White

Order Remarks

Add a note for the supplier or for your own reference:

Enter Order Remarks

Product Description

Press conditions ・ Flat type

temperature	140 ~ 150 ℃
time	12 to 15 seconds
pressure	2.45 ~ 3.43 x 10-²MPa

・ Roller type

temperature	140 ℃ ～ 150 ℃
time	12 to 15 seconds
pressure	0.245 ~ 0.343MPa

* Press conditions vary depending on the press model, so it is recommended to try and paste each time.

Bath ratio of water-soluble resin dissolution "1:30" (30L of water is required for 1kg of product. Also, be sure to rinse.

Category	Interfacing
Style	For Shirts/blouses
Tag	Manufacturer Will Be Discontinued


Specification	90cm x 60m
Material	65% polyester 35% cotton E CO
Handling	Bath ratio of water-soluble resin dissolution "1:30" (30L of water is required for 1kg of product. Also, be sure to rinse.
Brand / Manufacturer	KARANINGYO
Mailbox Delivery	Possible
Registration Date	2020/11/18

Share This Item

FAQ

Frequently asked questions about this product:

What are the standard sizes for inside belt interfacing used in men's garments?

33 mm, 38 mm.

What kind of problem is kiratsuki?

It is the phenomenon of resin sparkling through the gaps in the weave of the face fabric.
Materials with a loose weave and dark-colored lightweight fabrics are especially noticeable, so using colored resin will resolve it.

What kind of problem is bleed-through?

A state where adhesive resin seeps through to the outer fabric, impairing the fabric’s hand.
As a solution, choose one with a smaller adhesive resin particle size.

What does the D (denier) in 20D or 30D mean?

Denier is a unit used for filament yarn (continuous filament)* and refers to the weight per 9,000 m. If 9,000 m weighs 1 g, that is 1 denier; if it weighs 50 g, that is 50 denier.
The higher the denier count, the thicker the yarn and the heavier the fabric.

What kind of problem is bubbling?

A condition where fine air bubbles appear to be trapped between the outer fabric and interlining. It occurs because the compatibility between the fabric and interlining is poor. It may be resolved by choosing an interlining with vertical and horizontal stretch.

What kind of problem is fading?

It is when the uneven texture of the resin pellets becomes clearly visible on the surface of the outer textile. The solution is to choose interfacing with smaller resin dots.

What is the difference between single-dot and double-dot fusible interlining?

It is a difference in the adhesive coating method.
Single dot is made by solidifying fine powdered adhesive and transferring it in a dotted pattern onto the base fabric.
Because the adhesive is fine, it is less likely to bleed through thin materials and less likely to cause fading.
Double dot has a two-layer structure, with a gel-like adhesive forming the base and powdered adhesive layered on top of it.
It provides strong adhesion for a wide range of materials.

What is the difference between the whites such as KW, OW, W, and Y in fusible interlining colors?

The color notation varies by product number, but KW and W are fluorescent white, and Y and OW are off-white.
Fluorescent white is a whiter, purer white.

How should I choose interfacing?

The appropriate interlining varies depending on the face fabric material, thickness, and area of use, so we cannot give a single answer.
Please contact us via inquiries with the face fabric material, area of use (neckline, body, etc.), and desired hand feel.

If you can provide the face fabric, we can perform an adhesion test. Please request this from Interlining Adhesion Test.
By performing an adhesion test, you can find out in advance things like adhesive strength and changes in appearance.

MS-5200Manufacturer Will Be Discontinued Water-soluble Interlining For Shirts

Unit

Size

Color

Extension Key

Stock List

Order Remarks

Option

Product Description

FAQ

General Notes

Reviews

Related Items

Customers who viewed this product also viewed

Items from the same category

More from This Brand or Manufacturer

MS-5200
Manufacturer Will Be Discontinued

Water-soluble Interlining For Shirts