ApparelX is a global B2B marketplace for fabrics and apparel materials.

TM-0404-4FCS TM Faux Leather Four-Fold Core-Inserted Stitch Tape[Ribbons, Tapes, And Cords] Topman Kogyo

TM-0404-4FCS

TM Faux Leather Four-Fold Core-Inserted Stitch Tape

ApparelX ID:1097989

This faux leather four-fold stitched tape gives a refined look.
It creates a hard and casual style.

This item can be ordered by the roll. (1 roll = 25M estimated)

Set roll quantity

As this product is rolled in 25M estimated lengths, if the meterage is short, we will refund the corresponding amount. If it is over, we will charge for the shortage. In that case, we will contact you separately.

Brand / Manufacturer:Topman Kogyo

Supplier:

Size:Please select Color:Please select

Stock Status(*):Displayed after account registration

*Excl. tax

Qty.

Ask About This Product

Size

Please select a size:

6MM

Color

Please select a color:

401

403

404

412

414

415

417

428

438

443

444

445

446

470

472

473

475

477

478

479

491

492

499

Order Remarks

Add a note for the supplier or for your own reference:

Enter Order Remarks

Order Sample Book

Order a sample book here:

*Note: Sample Book Item will be added to your cart. Remove it from your cart if you do not need it. Your order notes will also be applied to the sample book.

SAMPLE

Sample Card

Product Description

This faux leather four-fold stitched tape gives a refined look.
It creates a hard and casual style.

This item can be ordered by the roll. (1 roll = 25M estimated)

Set roll quantity

The size notation indicates the folded state.

Category	Ribbons, Tapes, And Cords
Subcategory	Tape
Gender	Unisex
Application	General Purpose
Structure	Synthetic Leather
Style	INTERIOR, OUTER


Specification	Specification: 25m random/R
Material	100% polyester E
Handling	※Can be washed with water ※Depending on the combination with the textile used in the product, color migration due to sublimation may rarely occur, so product inspection is recommended.
Brand / Manufacturer	Topman Kogyo

Share This Item

FAQ

Frequently asked questions about this product:

Can tassel finishing be applied to cords?

Tassel finishing is possible using cords. It can be done simply by untying the cord, or by attaching a separate thin cord to the cord end. Since this is manual processing, a separate quote is required. Please contact us via the support page for details.

・Product number
・An image of the desired look, or an image showing the length, etc., if handwritten
・Planned quantity

What materials can be heat cut?

For synthetic fibers (polyester, nylon, acrylic, polypropylene, etc.), heat cutting is possible.
For natural fibers (cotton, linen, silk, etc.), heat cutting cannot be used because they will burn or char, so only scissors cutting is possible.
Even with synthetic fibers, extra-thick twist cord may not fuse properly, so please be careful.

Is logo printing possible?

Printing is possible depending on the material.
For details, please contact us here.

What do 7×7 mm and 9×9 mm mean in the width notation for binder tape and knit tape?

This width specification has a groove in the center and is used by sandwiching textile, etc.
In the case of 7×7 mm, it becomes 7 mm when folded in half.

Is it possible to specify an angled cut edge for heat cutting?

Angled cutting is possible, but since it is done by hand, there may be a deviation of a few degrees.
Please specify 45° diagonally, etc. when placing your order.

Is it possible to have tape or cord cut one by one to the specified length?

Yes, that is possible. Please select either scissor cutting or heat cutting from the options on each product page and enter the quantity.
Please write your desired length in the notes section at that time.
Since cutting always results in some cutting loss, if the number of cuts is large, it may not be possible to cut all of them from the number of rolls you ordered.
In that case, our order staff will contact you to confirm whether to cut as much as possible from the number of rolls ordered or to add more quantity.