ApparelX is B2B e-commerce site for the apparel industry.

6700-BT

6700 High Density Taffeta Flat Bias Tape

ApparelX ID:1098009

This product has been processed into bias tape.
This is a high-density taffeta using 50 denier/48 filament high-multi thread for both the warp and weft.
It has a soft texture and drapes well. Additionally, it has just the right amount of firmness and body, making it resistant to wrinkles.
This is a high-performance material with a one-sided sateen and water-repellent finish.
* The alternative product / substitute product is 7700-BT .

This product can be ordered in roll units. (1 roll = random 70 meters)

Set the quantity of rolls.

The product comes in 70m random. If the actual length is less than the stated length, we will refund the difference. If the actual length is more than the stated length, we will charge you for the difference. In that case, we will contact you separately.

Maker:STAR BRAND (Hoshika)

Supplier:

Size:Please select Color:Please select

Stock Status(*):Displayed after account registration

*Before taxes

Qty.

Inquiry About This Item

Size

Please select a size:

10MM

11MM

12MM

13MM

14MM

15MM

16MM

17MM

18MM

19MM

20MM

21MM

22MM

23MM

24MM

25MM

26MM

27MM

28MM

29MM

30MM

31MM

32MM

33MM

34MM

35MM

36MM

37MM

38MM

39MM

40MM

41MM

42MM

43MM

44MM

45MM

46MM

47MM

48MM

49MM

50MM

Color

Please select a color:

White

Canary

Yellow

Orange

Pale Pink

Pink

Rose Pink

Purple

Eggplant Navy

Red Purple

Crimson

Deep Red

Wine

Light Blue

Sky Blue

Deep Green

Dark Green

Flower Navy

Navy Blue

Blue And Blue

Midnight

Cream

Light Liquor

Grey

Dalliquor

Dark Beige

Tan

Deep Brown

Dark Peach

Dal Sage

Dalgray

Dull Green

Antique

Dark Brown

Chocola

Brown

Dark Chocola

Dark Gray

Charcoal Gray

Off White White

Black

Blue Gray

Shinkansen Blue

Burnt Brown

Gold

Ivory

Deep Orange

Dark Gray

Order Remarks

You can write a memo for the supplier, or yourself:

Enter Order Remarks

Order Sample Book

You can order the sample book here:

*Note: Sample Book Item to be added to your cart, so if you want to cancel it, please remove it from your cart. The information to be set in the remarks.

SAMPLE

Sample Card

Item Description

Set the quantity of rolls.

Category	Ribbon Tape Cord
Subcategory	Bias Tape
Gender	Unisex
Style	OUTER, PANT, OUTDOOR, UNIFORM, BAG
Tag	Scheduled To Be Discontinued


Country of Origin	Japan
Specification	Dyed: 50D x 50D, 274 threads; Dyeing: piece dyed; 48 color variations
Material	100% polyester E
Maker	STAR BRAND (Hoshika)

Share This Item

FAQ

Regarding this item, there are the following FAQ:

Is it possible to specify an oblique cut for the heat cut?

Diagonal cuts are also possible, but as this is done by hand, there may be a slight deviation of a few degrees.
When ordering, please specify an angle such as 45°.

Is it possible to add tassel to the cord ?

tassel processing is possible with strings. You can simply untie it, or you can attach another thin string to the end of the string. Since it will be hand-made, it will be a separate estimate. For details, please contact us from the support page .

<necessary information>
・Product number ・Image image or image that shows the length of handwriting ・Planned quantity

What materials can be heat cut?

Heat cutting is possible for synthetic fibers (polyester, nylon, acrylic, polypropylene), etc.
Natural fibers (cotton, linen, silk, etc.) can burn or burn, so they cannot be cut with heat, and can only be cut with scissors.
Please note that thick twisted cord may not harden well even if they are synthetic fibers.

Is logo printing possible?

You can print on the material.
For details, please contact us from here .

What do the widths of 7x7mm and 9x9mm mean for binder tapes and knit tapes?

The one with this width has a groove in the center and is used by sandwiching the textile.
In the case of 7 x 7 mm, it will be 7 mm when folded in half.

Is it possible to have the tapes and cord cut to the specified length one by one?

Is possible. Please select scissors cut or heat cut from the options on each product page and enter the quantity.
At that time, please write down the desired length in a memo.
During the cut, for sure it is Kattorosu occurs, there is a case when the number of cut often is not completely removed from the roll to receive your order.
In that case, we will contact you than order the person in charge to check whether to add a TorikiRika or quantity, from the roll receive the order.