ApparelX is a global B2B marketplace for fabrics and apparel materials.

UR-1000 Single Silk Satin[Ribbons, Tapes, And Cords] UNITED RIBBONS

UR-1000

Single Silk Satin

ApparelX ID:1099637

This silk satin ribbon lets you enjoy the texture and sheen unique to reeled silk. In satin weave, the "warp yarn" is an important factor that determines the texture and sheen. To improve the texture and sheen, it is woven with ultra-fine silk thread without twisting. Only one side has a smooth satin weave. We also have ribbons with satin weave on both sides in the same sizes and same range of colors. Of course, it is perfect for slightly luxurious uses, and using silk ribbon casually will dramatically increase the style factor.
*Please note that cut-to-length service is available up to 10M only.
*If you order by the roll, you can purchase it at half the unit price of meter cuts.

Brand / Manufacturer:UNITED RIBBONS

Supplier:

Size:Please select Color:Please select

Stock Status(*):Displayed after account registration

*Excl. tax

Qty.

Ask About This Product

Unit

* You can select a unit:

Size

Please select a size:

4MM

6MM

9MM

12MM

15MM

18MM

24MM

36MM

50MM

Color

Please select a color:

White

Pink

Misty Rose

Violet Red

Lemon Chiffon

Peach Puff

Crimson

Bordeaux Red

Royal Blue

Navy Blue

Midnight Blue

Dark Khaki

Forest Green

Dark Green

Plum

Purple

Seashell White (Off-White)

Blanched Almond

Wheat

Sienna

Straight Gray

Black

Light Gray

Antique White

Light Pink

Firebrick

Cornsilk

Yellow

Cream

Light Steel Blue

Steel Blue

Light Cornflower

Dark Slate Gray

100

Dark Steel Blue

101

Light Coral

106

Bisque

108

Light Olive

109

Olive Drab

110

Tan

115

Light Salmon

117

Rosy Brown

119

Dark Red

121

Dark Maroon

123

Dark Midnight Blue

128

Burlywood

132

Saddle Brown

134

Dark Sea Green

136

Dark Olive Green

139

Alice Blue

Order Remarks

Add a note for the supplier or for your own reference:

Enter Order Remarks

Order Sample Book

Order a sample book here:

*Note: Sample Book Item will be added to your cart. Remove it from your cart if you do not need it. Your order notes will also be applied to the sample book.

SAMPLE

Sample Card

Product Description

Category	Ribbons, Tapes, And Cords
Subcategory	Ribbon
Gender	Unisex
Application	General Purpose
Structure	Satin
Style	DRESS, FORMAL


Specification	1 roll 30m Size: 4mm/6mm/9mm/12mm/15mm/18mm/24mm/36mm/50mm
Material	100% silk SE
Handling	・Even with the same color number, slight color differences may occur depending on the dye lot. ・To prevent shrinkage issues, please check the differential shrinkage compared with the textile. ・Please use only after confirming that it meets the intended purpose.
Brand / Manufacturer	UNITED RIBBONS

Share This Item

FAQ

Frequently asked questions about this product:

Can tassel finishing be applied to cords?

Tassel finishing is possible using cords. It can be done simply by untying the cord, or by attaching a separate thin cord to the cord end. Since this is manual processing, a separate quote is required. Please contact us via the support page for details.

・Product number
・An image of the desired look, or an image showing the length, etc., if handwritten
・Planned quantity

What materials can be heat cut?

For synthetic fibers (polyester, nylon, acrylic, polypropylene, etc.), heat cutting is possible.
For natural fibers (cotton, linen, silk, etc.), heat cutting cannot be used because they will burn or char, so only scissors cutting is possible.
Even with synthetic fibers, extra-thick twist cord may not fuse properly, so please be careful.

Is logo printing possible?

Printing is possible depending on the material.
For details, please contact us here.

What do 7×7 mm and 9×9 mm mean in the width notation for binder tape and knit tape?

This width specification has a groove in the center and is used by sandwiching textile, etc.
In the case of 7×7 mm, it becomes 7 mm when folded in half.

Is it possible to specify an angled cut edge for heat cutting?

Angled cutting is possible, but since it is done by hand, there may be a deviation of a few degrees.
Please specify 45° diagonally, etc. when placing your order.

Is it possible to have tape or cord cut one by one to the specified length?

Yes, that is possible. Please select either scissor cutting or heat cutting from the options on each product page and enter the quantity.
Please write your desired length in the notes section at that time.
Since cutting always results in some cutting loss, if the number of cuts is large, it may not be possible to cut all of them from the number of rolls you ordered.
In that case, our order staff will contact you to confirm whether to cut as much as possible from the number of rolls ordered or to add more quantity.