ApparelX is B2B e-commerce site for the apparel industry.

MD523A THERMOFIX® For Men And Ladies's Shirts And Blouses[Interlining] Tohkai Thermo Thermo

MD523A

THERMOFIX® For Men And Ladies's Shirts And Blouses

ApparelX ID:1100160

This interlining uses microdot coated resin and is suitable for thin materials such as women's blouses and dresses.
It prevents bleeding problems and is suitable for a wide range of materials, from natural materials such as cotton and linen to synthetic fibers such as polyester.
*When ordering by roll, please enter 60 in the quantity field.

Set the number of rolls

Maker:Tohkai Thermo Thermo

Supplier:

Color:Please select

Stock Status(*):Displayed after account registration

*Before taxes

Qty.

Inquiry About This Item

Color

Please select a color:

Yellow

Dark Brown

Black

11W

Light Brown

15W

Blue

31W

Green

335

Light Blue

379

Light Pink

384

Red

62W

Bordeaux

75W

Brown

88N

Light Gray

121N

Light Beige

134N

Gray

230W

Mint

327W

Light Orange

331W

Yellow Khaki

376W

White

Order Remarks

You can write a memo for the supplier, or yourself:

Enter Order Remarks

Order Sample Book

You can order the sample book here:

*Note: Sample Book Item to be added to your cart, so if you want to cancel it, please remove it from your cart. The information to be set in the remarks.

SAMPLE

Sample Card

Item Description

Set the number of rolls

Pressing conditions: Flat type

temperature	125~150℃
time	10–18 seconds
pressure	15-39 (Kpa)

・Roller type

temperature	125℃～150℃
time	10–18 seconds
pressure	3.9 - 14.1 (N/cm)

* Press conditions vary depending on the press model, so we recommend that you test apply each time.

Category	Interlining
Subcategory	Fusible Interlining
Gender	Unisex
Use Applications	Tops, Blouses, Undergarments
Style	SHIRT, SKIRT, KNIT


Specification	Size: 112cm x 60m industry weight: 20gsm
Material	100% polyester E
Maker	Tohkai Thermo Thermo

Share This Item

FAQ

Regarding this item, there are the following FAQ:

What is the standard size of the invel core used by men?

33mm and 38mm.

What kind of trouble is glitter?

This is a phenomenon in which the resin can be seen glittering through the gaps in the surface material.
Low-density materials and dark-colored thin fabrics tend to stand out, so using colored resin can solve this problem.

What kind of trouble is Shimidashi?

The adhesive resin oozes out into the outer textile, which spoils the texture.
As a solution, choose a small shape adhesive resin.

What kind of trouble is fading?

The unevenness of the resin grains clearly appears on the surface of the outer textile. The solution is to choose a smaller resin interlining.

What does the D (denier) in 20D and 30D mean?

Denier is a unit used for filament thread(continuous long fiber)* and refers to the weight per 9000m. 1g at 9000m is 1 denier, and 50g is 50 denier.
The higher the denier, the thicker the thread and the thicker the fabric.

What kind of trouble is bubbling?

It looks like there are fine air bubbles between the outer textile and the interlining. The textile and the interlining are incompatible, so it is placed. If you choose a vertical or horizontal stretch interlining, it may be eliminated.

What is the difference between single-dot and double-dot fusible interlining interfacing?

The difference is the coating method of the adhesive.
A single dot is made by solidifying a fine powder adhesive and transferring it to the base fabric (base fabric) in dots.
Since the adhesive is fine, it does not fading out even on thin materials, and it is difficult to get hits.
Double Dot has a two-layer structure in which a gel-like adhesive is used as the base, and powdered adhesive is piled up on top of it.
High adhesive strength can be obtained for a wide range of materials.

What is the difference between white, such as KW, fusible interlining, W, and Y, in the color of the fusible interfacing?

The color notation differs depending on the product number, but KW and W are fluorescent white, and Y and OW are off-white.
Fluorescent white is more pure white.

Is it possible to ship the interlining in a bar roll?

Basically, if it is 5m or more, we will ship it by wrapping it around a stick.

How do I choose an interlining?

The interlining varies depending on the outer material, thickness, and location of use, so it is not possible to generalize.
Please let us know the material of the outer material, the parts to be used (neckline, body, etc.) and the desired texture from the inquiry form.

Also, if you provide the outer material, we can conduct an adhesion test. Please request from interlining adhesion test .
By performing an adhesion test, you can know in advance the adhesion strength and changes in appearance.