ApparelX is a global B2B marketplace for fabrics and apparel materials.

Multiple shopping bags are now available Details

NY4411B Nylon Cord 8MM[Ribbons, Tapes, And Cords] Cordon

NY4411B

Nylon Cord 8MM

ApparelX ID:1103296

There are no reviews yet.

This is a beautifully lustrous nylon braided cord made in Japan.

Brand / Manufacturer:Cordon

Supplier:Okura Shoji Co., Ltd.

Color:Please select

Stock Status(*):Displayed after account registration

Per Meter(M)

Qty.

Ask About This Product

Unit

* You can select a unit:

Hank

Meter

Color

Please select a color:

Black

Ecru

Bleached White

Order Remarks

Add a note for the supplier or for your own reference:

Enter Order Remarks

Product Description

This is a beautifully lustrous nylon braided cord made in Japan.

Category	Ribbons, Tapes, And Cords
Subcategory	Round Drawstring
Gender	Unisex
Application	General Purpose
Structure	Cord


Specification	Lot / finish: 50 m hank winding Width: approx. 8 mm
Material	100% acrylic PA
Handling	Please note that the color, thickness, and texture may vary slightly depending on the production lot. Nylon will yellow when exposed to sunlight. In particular, light colors are more susceptible to this effect, so please understand this in advance.
Brand / Manufacturer	Cordon
Mailbox Delivery	Possible
Registration Date	2025/12/05

Share This Item

FAQ

Frequently asked questions about this product:

Can tassel finishing be applied to cords?

Tassel finishing is possible using cords. It can be done simply by untying the cord, or by attaching a separate thin cord to the cord end. Since this is manual processing, a separate quote is required. Please contact us via the support page for details.

・Product number
・An image of the desired look, or an image showing the length, etc., if handwritten
・Planned quantity

What materials can be heat cut?

For synthetic fibers (polyester, nylon, acrylic, polypropylene, etc.), heat cutting is possible.
For natural fibers (cotton, linen, silk, etc.), heat cutting cannot be used because they will burn or char, so only scissors cutting is possible.
Even with synthetic fibers, extra-thick twist cord may not fuse properly, so please be careful.

Is logo printing possible?

Printing is possible depending on the material.
For details, please contact us here.

Is it possible to specify an angled cut edge for heat cutting?

Angled cutting is possible, but since it is done by hand, there may be a deviation of a few degrees.
Please specify 45° diagonally, etc. when placing your order.

What do 7×7 mm and 9×9 mm mean in the width notation for binder tape and knit tape?

This width specification has a groove in the center and is used by sandwiching textile, etc.
In the case of 7×7 mm, it becomes 7 mm when folded in half.

Is it possible to have tape or cord cut one by one to the specified length?

Yes, that is possible. Please select either scissor cutting or heat cutting from the options on each product page and enter the quantity.
Please write your desired length in the notes section at that time.
Since cutting always results in some cutting loss, if the number of cuts is large, it may not be possible to cut all of them from the number of rolls you ordered.
In that case, our order staff will contact you to confirm whether to cut as much as possible from the number of rolls ordered or to add more quantity.