ApparelX is a global B2B marketplace for fabrics and apparel materials.

Multiple shopping bags are now available Details

HA-4050 Linen-blend Herringbone Tape[Ribbons, Tapes, And Cords] Hashimoto

HA-4050

Linen-blend Herringbone Tape

ApparelX ID:1104631

There are no reviews yet.

This herringbone tape is made of acrylic/linen material. It comes in natural color variations and can be used for a wide range of applications.
It is a 30-meter roll. If you purchase it by the roll (R), you can buy it at half the unit price per meter.

Brand / Manufacturer:Hashimoto

Supplier:Okura Shoji Co., Ltd.

Size:Please select Color:Please select

Stock Status(*):Displayed after account registration

Per Meter(M)

Qty.

Ask About This Product

Unit

* You can select a unit:

Meter

Roll

Size

Please select a size:

6mm

10mm

15mm

20mm

25mm

30mm

Color

Please select a color:

Gray

Black

Off-white

Sand Beige

Cork

Brown

Dark Brown

Orange

Beige

Leaf Green

Elm Green

Ash Green

Light Blue

Saxe Blue

Navy Blue

Order Remarks

Add a note for the supplier or for your own reference:

Enter Order Remarks

Product Description

Category	Ribbons, Tapes, And Cords
Subcategory	Tape
Gender	Unisex
Application	General Purpose
Structure	Herringbone


Specification	1 roll 30 m Size: 6mm/10mm/15mm/20mm/25mm/30mm
Material	76% acrylic 34% linen LI MA
Brand / Manufacturer	Hashimoto
Mailbox Delivery	Possible
Registration Date	2025/09/11

Share This Item

FAQ

Frequently asked questions about this product:

Can tassel finishing be applied to cords?

Tassel finishing is possible using cords. It can be done simply by untying the cord, or by attaching a separate thin cord to the cord end. Since this is manual processing, a separate quote is required. Please contact us via the support page for details.

・Product number
・An image of the desired look, or an image showing the length, etc., if handwritten
・Planned quantity

What materials can be heat cut?

For synthetic fibers (polyester, nylon, acrylic, polypropylene, etc.), heat cutting is possible.
For natural fibers (cotton, linen, silk, etc.), heat cutting cannot be used because they will burn or char, so only scissors cutting is possible.
Even with synthetic fibers, extra-thick twist cord may not fuse properly, so please be careful.

Is logo printing possible?

Printing is possible depending on the material.
For details, please contact us here.

Is it possible to specify an angled cut edge for heat cutting?

Angled cutting is possible, but since it is done by hand, there may be a deviation of a few degrees.
Please specify 45° diagonally, etc. when placing your order.

What do 7×7 mm and 9×9 mm mean in the width notation for binder tape and knit tape?

This width specification has a groove in the center and is used by sandwiching textile, etc.
In the case of 7×7 mm, it becomes 7 mm when folded in half.

Is it possible to have tape or cord cut one by one to the specified length?

Yes, that is possible. Please select either scissor cutting or heat cutting from the options on each product page and enter the quantity.
Please write your desired length in the notes section at that time.
Since cutting always results in some cutting loss, if the number of cuts is large, it may not be possible to cut all of them from the number of rolls you ordered.
In that case, our order staff will contact you to confirm whether to cut as much as possible from the number of rolls ordered or to add more quantity.