ApparelX is B2B e-commerce site for the apparel industry.

Year-End & New Year's Holidays (Dec 27 - Jan 4)

5QN Quicklon® Hook And Loop Hook And Loop Fastener (Double-sided)[Zipper] YKK

5QN

Quicklon® Hook And Loop Hook And Loop Fastener (Double-sided)

ApparelX ID:1106449

This product is factory processing and only available in rolls. Please note that delivery will take approximately one month.

This product has the hook and loop sides placed back to back.
It can be used as a binding belt by simply wrapping it around without using any additional rectangle ring.
The only colors available are white (501) and black (580).

Maker:YKK

Supplier:

Size:Please select Color:Please select

Stock Status(*):Displayed after account registration

*Before taxes

Qty.

Inquiry About This Item

Size

Please select a size:

16MM

20MM

25MM

30MM

50MM

100MM

Color

Please select a color:

501

White

580

Order Remarks

You can write a memo for the supplier, or yourself:

Enter Order Remarks

Item Description

This product is factory processing and only available in rolls. Please note that delivery will take approximately one month.

Category	Zipper
Subcategory	Hook-and-Loop Fastener
Gender	Unisex
Tag	NEW


Specification	16, 20, 25, 30, 50, 100mm width 1 roll 25 meters C/#501 (white), C/#580 (black) only
Material	nylon PA
Maker	YKK

Share This Item

FAQ

Regarding this item, there are the following FAQ:

Can I select DA2E with the two way separator zipper of the 8 size EXCELLA ?

In the case of the 8-size EXCELLA two way separator zipper, the lower slider does not have the DA2E standard, but it is possible to arrange for the upper slider to be DA2E and the lower slider to be DA1, etc.

Do you carry decorative series pull tab such as ZY02 and ZY13?

It is possible to arrange pull tab for the decorative series. When ordering a zipper , please indicate the desired pull tab in the remarks column on the ApparelX product page. Decorative series handles are basically factory-produced.

Can you arrange 4 sizes of aluminum metal zipper?

We are sorry, but it will be discontinued in March 2022.
If it is YZiP aluminum of similar twist, it can be arranged in 4 sizes.
4YANC YZiP® zipper (aluminum) 4 sizes stop
4YANOR YZiP® zipper (aluminum) 4 sizes open

Is it possible to arrange zipper sliders without the YKK/ EXCELLA logo?

Is possible. In that case, it will be factory production only. We will arrange it if you can write it in the memo column or remarks column when ordering.

Do you handle zipper with beads?

There is no product called a zipper with a ball, and a slider called DABL is a slider with a ball.
Please select the slider "DABL" from the desired zipper product page and place an order.

Do you have color samples for tape colors?

We sell tape color card sample book .

How should I specify the plating color cord for the slider?

cord	specification
E.	Painting
P.	high grade nickel plating
N.	Nickel plating
C5	silver plating
C6	matt silver plated
H3	antique silver plating
V3	black silver plated
X6	matte black
Q.	real gold plating
OUs	luxury gold plated
O	gold plated
KQ	clear gold plating
I	antique gold plating

Please fill in the desired color in the remarks column according to the correspondence table above, such as "slider color P plating desired".

The back of the size 3 YZiP slider GSBN8 says 4.5, is that correct?

For the three sizes of YZiP's GSBN8 sliders, there are three sizes marked as 4.5.
Please rest assured that there are three sizes to choose from.

Can you arrange YKK old American zipper?

Available only for factory production. Please allow 3-4 weeks for delivery.
If you contact us from the support page with the following information, we will confirm the unit price and delivery date.

･ zipper product categories [stop, open, two way separator two way separator(Only C/# gold is the element color that can attach 2 sliders such as reverse open.)]
･Size, length, quantity, element color, tape color, slider, top stop, bottom stop, brand name to be used

Do you handle open type zipper?

We are very sorry, but the open type zipper will be discontinued in all sizes as of March 2022.
This item cannot be arranged.

Do you handle zipper longer than 100cm or shorter zipper 20cm?

can be arranged. Please choose a similar length and write the length you want in the remarks column.
*Price varies depending on length.

I want it separately without the zipper top stop. Is it possible to order?

Is possible. If you specify in the remarks column when ordering, we will arrange it. We will contact you separately for the unit price.

Can you arrange the zipper for the back side?

Is possible. If you can write it in the remarks column or the memo column when ordering, we will arrange it with a zipper on the back.

I would like the one with the zipper on the left. Is it possible to order?

Is possible. For open zipper, the part number ends with OR for right insertion and OL for left insertion. In the case of a two way separator zipper, the end of the part number is MR for right insertion and ML for left insertion.
Currently, ApparelX has a product page for right insertion only, so could you place an order from the right insertion product page?
If you specify in the remarks column at the time of ordering that you would like to change to the left insert, we will arrange it. We will inform you about the unit price separately.

Is it possible to order in a length not listed on the product page?

Is possible. When ordering, please select a length close to your desired length, and if you specify the desired length in the remarks column, we will change it to that length and arrange it. (It may take some time for delivery)

Is it possible to order zipper in 0.5 cm increments? If so, how should I order it?

Yes, that is possible. Please specify the desired length in the comments section when ordering and we will arrange it to be that length.
In addition, please order the length incremented by 0.5 cm. (Example: If you would like to order 20.5 cm, select 21 cm and write "20.5 cm preferred" in the comments section.)

I want a zipper for head-to-head and butt-matching. How should I place an order?

When ordering the zipper, please specify in the comments section whether you want it to be fitted at the head or tail.
We will confirm the unit price and delivery date and contact you by email.

Head and tail fitting standards〈Metal zipper〉5 sizes/7 sizes/8 sizes/10 sizes 〈Vislon〉 3 sizes/5 sizes/8 sizes

Is it possible to order a zipper in a color that is not listed on the product page? If so, how should I order it?

Is possible. If you can specify the desired color number in the remarks column when ordering, we will arrange it in that color.
*Colors that are not listed on the product page are often out of stock, and if the color is out of stock, it will be arranged at the factory.

What color is the slider for the western white metal zipper?

It will be nickel colored. The nickel color has a slightly yellow tint like a 500-yen coin, but the nickel color is a whitish, bright silver color.

Is it possible to change the color of the slider?

Is possible. As a general rule, if nothing is specified, the metal zipper will have a slider of the same color as the element, and the other zipper will have a slider of the same color as the tape color.
(Slider with a retrofit puller is only available in metal color)
The color of the slider on the product page is a sample, so the color will change depending on the zipper you order.
If you want to change the color of the slider, please describe it in the order memo.

Which slider should I choose if I want to attach a Zipper’s Pull Tab later?

Please select a slider such as CA or ZA / ZF that can be retrofitted with a Zipper’s Pull Tab tab.
The difference between CA and ZA / ZF is whether or not a Zipper’s Pull Tab can be attached from the root.
Zipper’s Pull Tab are sold by various manufacturers, but please check the specifications as to whether they can be attached to CA or ZA.
The color of the slider for retrofitting is only metal color.

Is it possible to arrange only YKK zipper sliders?

Basically, we cannot accept orders for the slider alone, but we can arrange it if you want to arrange it together with the chain zipper or if you use it for the zipper you have purchased from APPARELX in the past.
In that case
Please let us know the type, size, slider color, slider part number and quantity of the YKK zipper you purchased from the contact form on the support page . We will reply to you after confirmation.

I would like to order with different sliders on the top and bottom of the reverse opening zipper, what should I do?

If you write the desired slider up and down in the memo field of the zipper when ordering, we will change it to the desired slider and arrange it.

Is it possible to arrange a comprehensive zipper catalog "FASTENING Senka"?

Currently, the booklet type FASTENING Senka is no longer manufactured. We apologize for the inconvenience, but you can download it from the YKK website, so please check it from there.
https://www.ykkfastening.com/japan/catalog/

How should I choose the slider with or without lock?

You can judge by the second letter of the slider part number.
"A" = automatic lock (When you release the hand from the Zipper’s Pull Tab automatically is locked, the lock is disengaged by pulling the Zipper’s Pull Tab)
"F" = non-locking (slider that does not lock the pull tab at any position on the fuselage)
"N" = Notch lock (The torso has a notch on the shoulder and locks when the chain is opened so that it touches the shoulder)
"W" = reversible (there are Zipper’s Pull Tab on the front and back, which can be opened from both)
"U" = reversible (an automatic slider that allows one puller to move along the rotating rail and can be opened and closed from both the front and back.)

I would like to order with a color slider that is not listed on the product page, what should I do?

If you enter the desired color and slider in the memo field of the zipper when ordering, we will change it and arrange it.

I chose priority delivery (processing and production), but what does it mean to process from long items?

The stock of zipper, 2CHC concealment of zipper products, is the length of your designated frankly does not have an inventory. In the case of processing production, it is possible to process by making a longer zipper, but in that case the delivery time will be faster, but the unit price will be higher. If you want to process from a long stock immediately, please select "priority on delivery date (unit price increase)".

The following article is about coil zipper, but I will write about the zipper inventory.
https://apparelx-news.jp/apparel-material/zipper/coil-fastener