ApparelX is a global B2B marketplace for fabrics and apparel materials.

NSW600 Water-soluble Resin Interfacing For Garment Dyeing And Washing, Semi-hard Type 45/ Nittobo Advantex

NSW600

Water-soluble Resin Interfacing For Garment Dyeing And Washing, Semi-hard Type 45/

ApparelX ID:1020007

With a moderate amount of body and crispness, it can be used in a wide range of applications such as shirt collars, facings, and cuffs.
Because it uses a water-soluble adhesive resin, it bonds during the sewing stage, but when washed with water it becomes a non fusible interlining, giving a comfortable, well-adapted texture that cannot be achieved with fusible interlining.
By using a dot-type resin structure, it is less likely to feel sticky than conventional sinter-type products and offers excellent handling.
This is a semi-hard type that is thicker than NSW300.
As soon as NSW600 is out of stock, it will be replaced with the new product number NSW600A. Thank you for your understanding.

Brand / Manufacturer:Nittobo Advantex

Supplier:

Color:Please select

Stock Status(*):Displayed after account registration

*Excl. tax

Qty.

Ask About This Product

Color

Please select a color:

Black

Order Remarks

Add a note for the supplier or for your own reference:

Enter Order Remarks

Order Sample Book

Order a sample book here:

*Note: Sample Book Item will be added to your cart. Remove it from your cart if you do not need it. Your order notes will also be applied to the sample book.

SAMPLE

Sample Card

Product Description

Pressing conditions
・Flat type

Temperature	120~135℃
Time	10〜15 seconds
Pressure	2.0~3.0×10- ² MPa(0.2〜0.3kgf/cm²)

・Roller type

Temperature	120〜135℃
Time	10〜12 seconds
Pressure	0.15~0.3MPa(1.5〜3.0kgf/cm²)

* Pressing conditions vary depending on the press machine, so we recommend test pressing each time.

・In humid environments, the adhesive may become tacky. Store away from hot, humid places.
・When cutting, perform one-way roll spreading.
・When using, apply stitching, locking, or other interlining securing treatment.
・Do not dry clean while the adhesive is still bonded.
・When piece dyeing or washing is performed, first dissolve the resin in water at 40°C or below, then carry out the draining and rinsing steps.

product number	ONW30	ONW50	BW810	BW820	BW870	BW890	NSW30	NSW100	NSW190W	NSW300	NSW600
product name	High-durability interfacing for garment bio-wash (30D)	High-durability interfacing for garment bio-wash (50D)	Water-based wash-durable interfacing for garment wash processing (15D)	Water-based wash-durable interfacing for garment wash processing (30D)	Water-based wash-durable interfacing for garment wash processing (30D)	Water-based wash-durable interfacing for garment wash processing (30D)	Water-soluble resin interfacing for garment dyeing and garment washing, stretch yarn type	Water-soluble resin interfacing for garment dyeing and garment washing, soft type 40/	Water-soluble resin interfacing for garment dyeing and garment washing, standard type 45/	Water-soluble resin interfacing for garment dyeing and garment washing, hard type	Water-soluble resin interfacing for garment dyeing and garment washing, semi-hard type 45/
thumbnail
thinness order	2	3	1	2	2	2	2	3	3	5	4
type	High-durability fully fusible type	High-durability fully fusible type	High-durability fully fusible type	High-durability fully fusible type	High-durability fully fusible type	High-durability fully fusible type	Water-soluble type/stretch	Water-soluble type/soft	Water-soluble type/standard	Water-soluble type/hard	Water-soluble type/semi-hard
intended use	Jackets, blousons, coats	Jackets, blousons, coats	Blousons, jackets, coats, pant fronts, facings, parts	Blousons, jackets, coats, pant fronts, facings, parts	Blousons, jackets, coats, pant fronts, facings, parts	Blousons, jackets, coats, pant fronts, facings, parts	General garment wash processing, shirts, etc.	General garment wash processing, shirts, etc.	General garment wash processing, shirts, etc.	General garment wash processing, shirts, etc.	General garment wash processing, shirts, etc.
compatible materials	Natural materials to blended and synthetic materials	Natural materials to blended and synthetic materials	Natural materials to blended and synthetic materials	Natural materials to blended and synthetic materials	Natural materials to blended and synthetic materials	Natural materials to blended and synthetic materials	Natural to blended materials	Natural to blended materials	Natural to blended materials	Natural to blended materials	Natural to blended materials

* Horizontal scrolling is available.

* The above information is for reference only. Please check the actual product before use.

Category	Interfacing
Subcategory	Fusible Interlining
Gender	Unisex
Intended Use	General Purpose
Style	SHIRT, UNIFORM


Specification	112 cm wide × 60 m
Material	polyester:65% cotton:35% E CO
Brand / Manufacturer	Nittobo Advantex

Share This Item

FAQ

Frequently asked questions about this product:

What are the standard sizes for inside belt interfacing used in men's garments?

33 mm, 38 mm.

What kind of problem is kiratsuki?

It is the phenomenon of resin sparkling through the gaps in the weave of the face fabric.
Materials with a loose weave and dark-colored lightweight fabrics are especially noticeable, so using colored resin will resolve it.

What kind of problem is bleed-through?

A state where adhesive resin seeps through to the outer fabric, impairing the fabric’s hand.
As a solution, choose one with a smaller adhesive resin particle size.

What does the D (denier) in 20D or 30D mean?

Denier is a unit used for filament yarn (continuous filament fiber)*, indicating the weight per 9,000 m. If 9,000 m weighs 1 g, it is 1 denier; if it weighs 50 g, it is 50 denier.
The higher the denier count, the thicker the thread and the heavier the fabric.

What kind of problem is bubbling?

A condition where fine air bubbles appear to be trapped between the outer fabric and interlining. It occurs because the compatibility between the fabric and interlining is poor. It may be resolved by choosing an interlining with vertical and horizontal stretch.

What kind of problem is fading?

It is when the uneven texture of the resin pellets becomes clearly visible on the surface of the outer textile. The solution is to choose interfacing with smaller resin dots.

What is the difference between single-dot and double-dot fusible interlining?

It is a difference in the adhesive coating method.
Single dot is made by solidifying fine powdered adhesive and transferring it in a dotted pattern onto the base fabric.
Because the adhesive is fine, it is less likely to bleed through thin materials and less likely to cause fading.
Double dot has a two-layer structure, with a gel-like adhesive forming the base and powdered adhesive layered on top of it.
It provides strong adhesion for a wide range of materials.

What is the difference between the whites such as KW, OW, W, and Y in fusible interlining colors?

The color notation varies by product number, but KW and W are fluorescent white, and Y and OW are off-white.
Fluorescent white is a whiter, purer white.

Can interfacing be shipped rolled on a tube?

Basically, orders of 5 m or more will be shipped wound on a tube.

How should I choose interfacing?

The appropriate interlining varies depending on the face fabric material, thickness, and area of use, so we cannot give a single answer.
Please contact us via inquiries with the face fabric material, area of use (neckline, body, etc.), and desired hand feel.

If you can provide the face fabric, we can perform an adhesion test. Please request this from Interlining Adhesion Test.
By performing an adhesion test, you can find out in advance things like adhesive strength and changes in appearance.