ApparelX is a global B2B marketplace for fabrics and apparel materials.

M-9100-PIPING

M-9100 Aurora Color Reflective Piping Tape

ApparelX ID:1097528

This item has been processed into piping tape.
It is constructed with four layers: a glass bead layer, aurora layer, color layer, and polyester taffeta layer, and is a reflector that combines the safety of standard reflective materials with the fashionable effect of color shifting like an aurora. It can be used for a variety of purposes, such as accents on outerwear, bags, and miscellaneous goods.
This item can be ordered in roll units. (1 roll = 25m estimated)

Set the roll quantity

The pinking piping is <M-9100-PKK>

As this product is an estimated 25m roll, if the quantity is less than 25m, we will refund the amount for that quantity. If it is more, we will charge for the shortage. In that case, we will contact you separately.

Brand / Manufacturer:STAR BRAND (Hoshika)

Supplier:

Size:Please select Color:Please select

Stock Status(*):Displayed after account registration

*Excl. tax

Qty.

Ask About This Product

Size

Please select a size:

PF55

PF85

Color

Please select a color:

White

Red

Silver

Blue

Black

Order Remarks

Add a note for the supplier or for your own reference:

Enter Order Remarks

Order Sample Book

Order a sample book here:

*Note: Sample Book Item will be added to your cart. Remove it from your cart if you do not need it. Your order notes will also be applied to the sample book.

SAMPLE

Sample Card

Product Description

Set the roll quantity

The pinking piping is <M-9100-PKK>

Category	Ribbons, Tapes, And Cords
Subcategory	Tape
Gender	Unisex
Style	FUNCTIONAL, OUTDOOR, UNIFORM, OUTER


Country of Origin	Japan
Specification	1roll: 25m estimated roll luminance: 30cd/lux/m2 (This is a representative value at observation angle 0.2° and entrance angle +5°, and is not a guaranteed value.)
Material	Base fabric: polyester 100% E
Brand / Manufacturer	STAR BRAND (Hoshika)

Share This Item

FAQ

Frequently asked questions about this product:

Can tassel finishing be applied to cords?

Tassel finishing is possible using cords. It can be done simply by untying the cord, or by attaching a separate thin cord to the cord end. Since this is manual processing, a separate quote is required. Please contact us via the support page for details.

・Product number
・An image of the desired look, or an image showing the length, etc., if handwritten
・Planned quantity

What materials can be heat cut?

For synthetic fibers (polyester, nylon, acrylic, polypropylene, etc.), heat cutting is possible.
For natural fibers (cotton, linen, silk, etc.), heat cutting cannot be used because they will burn or char, so only scissors cutting is possible.
Even with synthetic fibers, extra-thick twist cord may not fuse properly, so please be careful.

Is logo printing possible?

Printing is possible depending on the material.
For details, please contact us here.

What do 7×7 mm and 9×9 mm mean in the width notation for binder tape and knit tape?

This width specification has a groove in the center and is used by sandwiching textile, etc.
In the case of 7×7 mm, it becomes 7 mm when folded in half.

Is it possible to specify an angled cut edge for heat cutting?

Angled cutting is possible, but since it is done by hand, there may be a deviation of a few degrees.
Please specify 45° diagonally, etc. when placing your order.

Is it possible to have tape or cord cut one by one to the specified length?

Yes, that is possible. Please select either scissor cutting or heat cutting from the options on each product page and enter the quantity.
Please write your desired length in the notes section at that time.
Since cutting always results in some cutting loss, if the number of cuts is large, it may not be possible to cut all of them from the number of rolls you ordered.
In that case, our order staff will contact you to confirm whether to cut as much as possible from the number of rolls ordered or to add more quantity.