ApparelX is a global B2B marketplace for fabrics and apparel materials.

Multiple shopping bags are now available Details

9000-2F

9000 Nylon Taffeta Double-Fold Tape

ApparelX ID:1098034

There are no reviews yet.

This product has been processed into two-fold tape.
This nylon fabric is woven with 70-denier nylon yarn at 210 picks.
With a water-repellent finish and acrylic coating on the back, this is a very versatile textile that can be used for both apparel and materials.
* Colors are limited to white/black only.

This product can be ordered in roll units. (1 roll = 70 m random length)

Set roll quantity

Because the product is a 70 m random roll, if the actual length is less than the stated amount, we will refund the difference. If it is more, we will charge for the shortage. In that case, we will contact you separately.

Brand / Manufacturer:STAR BRAND (Hoshika)

Supplier:Okura Shoji Co., Ltd.

Size:Please select Color:Please select

Stock Status(*):Displayed after account registration

Per Meter(M)

Qty.

Ask About This Product

Size

Please select a size:

6mm

7mm

8mm

9mm

10mm

11mm

12mm

13mm

14mm

15mm

16mm

17mm

18mm

19mm

20mm

21mm

22mm

25mm

30mm

31mm

35mm

40mm

50mm

Color

Please select a color:

White

Black

Order Remarks

Add a note for the supplier or for your own reference:

Enter Order Remarks

Order Sample Book

Order a sample book here:

*Note: Sample Book Item will be added to your cart. Remove it from your cart if you do not need it. Your order notes will also be applied to the sample book.

STARBRAND-SAMPLE1

STAR BRAND Sample Card

Product Description

Set roll quantity

Category	Ribbons, Tapes, And Cords
Subcategory	Tape
Gender	Unisex
Style	For Outerwear/blousons/coats, For Pants, Outdoor, For Uniforms/Workwear, For Bags


Country of Origin	Japan
Specification	Thread count: 70D×70D, 210 threads Dyeing: piece dyed, 33 color variations
Material	100% nylon PA
Brand / Manufacturer	STAR BRAND (Hoshika)
Mailbox Delivery	Not Possible
Registration Date	2024/12/02

Share This Item

FAQ

Frequently asked questions about this product:

Can tassel finishing be applied to cords?

Tassel finishing is possible using cords. It can be done simply by untying the cord, or by attaching a separate thin cord to the cord end. Since this is manual processing, a separate quote is required. Please contact us via the support page for details.

・Product number
・An image of the desired look, or an image showing the length, etc., if handwritten
・Planned quantity

What materials can be heat cut?

For synthetic fibers (polyester, nylon, acrylic, polypropylene, etc.), heat cutting is possible.
For natural fibers (cotton, linen, silk, etc.), heat cutting cannot be used because they will burn or char, so only scissors cutting is possible.
Even with synthetic fibers, extra-thick twist cord may not fuse properly, so please be careful.

Is logo printing possible?

Printing is possible depending on the material.
For details, please contact us here.

Is it possible to specify an angled cut edge for heat cutting?

Angled cutting is possible, but since it is done by hand, there may be a deviation of a few degrees.
Please specify 45° diagonally, etc. when placing your order.

What do 7×7 mm and 9×9 mm mean in the width notation for binder tape and knit tape?

This width specification has a groove in the center and is used by sandwiching textile, etc.
In the case of 7×7 mm, it becomes 7 mm when folded in half.

Is it possible to have tape or cord cut one by one to the specified length?

Yes, that is possible. Please select either scissor cutting or heat cutting from the options on each product page and enter the quantity.
Please write your desired length in the notes section at that time.
Since cutting always results in some cutting loss, if the number of cuts is large, it may not be possible to cut all of them from the number of rolls you ordered.
In that case, our order staff will contact you to confirm whether to cut as much as possible from the number of rolls ordered or to add more quantity.