KW-PGDTH150

Pongee Non-Slip

※If ordering by the roll, please enter 50 for the quantity

〈Handling Precautions for the Non-Slip Series〉
The dot area of the non-slip series is designed with resin selected to prioritize slip resistance. For this reason, a relatively soft resin is used as the main component. As a result, it also has the following limitations during use.
Please note the following to maximize non-slip performance and maintain it over the long term.

1) Heat resistance (tumble drying, ironing, heat press)
The main component is a temperature-sensitive resin in order to provide non-slip performance even in low-temperature environments.
Therefore, when exposed to high heat, the dots may soften and cause deformation, detachment, or transfer.
For example, this includes heat from tumble drying and ironing.
For laundry drying, avoid forced heat drying such as tumble drying and recommend line drying in the shade.
Ironing and heat pressing involve not only heat but also pressure, so these are the most strongly discouraged.

2) Resistance to plasticizers, waxes, and oils
Plasticizers contained in PVC sheets, sofas, and the like, as well as waxes and oils used on flooring, furniture, and similar items, may soften the dots and cause transfer, detachment, or deformation. Avoid prolonged direct contact.

3) Resistance to solvents (kerosene, thinner, etc.)
The dot resin may dissolve or swell in certain solvents. For example, if kerosene or thinner is spilled, do not rub immediately; absorb it into a cloth or similar material and remove it. Also avoid using solvents when removing stains from dirt, etc.

4) Dry cleaning
Likewise, please avoid dry cleaning.

5) Washing
Hand washing in lukewarm water is recommended. If using a washing machine, place the item in a mesh laundry bag and wash on a gentle cycle. For composite products such as those with outer fabric, hand wash in lukewarm water, as strong friction and other stress may cause the dots to detach.

6) Strong friction and excessive load
If heavy furniture or other items are placed on it, the dots may flatten. Also, dragging or friction may cause partial peeling or deformation of the dots. Please avoid these actions.

7) Contact with glossy surfaces such as varnished or lacquered finishes
Please avoid placing it on glossy surfaces such as pianos. Traces of the dots may remain on the glossy surface.

8) Blocking phenomenon
As noted at the beginning, since the dots use a relatively soft resin, it cannot be said that there is absolutely no risk of adhesion to the other material in combination with the above issues. Please check periodically for any abnormalities.

9) Resistance to sunlight
The dots are relatively resistant to sunlight, but there is no harm in avoiding direct sunlight. Avoiding it will allow the item to be used for a longer period.