ApparelX is a global B2B marketplace for fabrics and apparel materials.

SUK28

Super Keep Strong Adhesive Wide Width Interfacing

ApparelX ID:1023220

This product currently has unstable greige fabric production. Please check stock availability, and if you wish to order more than the available stock, please contact us from here with the quantity you need before placing your order.

With Nittobo’s new technology, this product delivers stronger adhesion than conventional micro-dot products and maintains that strong adhesion even after washing. By using a base fabric with a special weave structure, it eliminates the paper-like feel of processed-yarn interfacing and creates a fuller, higher-quality texture.
By controlling the stretch properties of the special woven base fabric (semi-stretch), it firmly maintains collar tip shape and waist measurements. It uses a special woven base fabric with a very high anti-moire effect, plus special coating dots that are less likely to bleed through even on shirting materials, so you can use it with little concern about changes in the appearance of the outer fabric.

Brand / Manufacturer:Nittobo Advantex

Supplier:

Color:Please select

Stock Status(*):Displayed after account registration

*Excl. tax

Qty.

Ask About This Product

Color

Please select a color:

Light Beige

Black

204

Green

217

Beige

267

Gray

White

Order Remarks

Add a note for the supplier or for your own reference:

Enter Order Remarks

Order Sample Book

Order a sample book here:

*Note: Sample Book Item will be added to your cart. Remove it from your cart if you do not need it. Your order notes will also be applied to the sample book.

SAMPLE

Sample Card

Product Description

Suitable for a wide range of fabrics, from natural to synthetic, and can be used for facings, collars, and other parts of blouses, shirts, and bottoms.

Temperature (℃)	Time (seconds)	Gauge Pressure	Line Pressure
140~150	10~15	2.0~3.0×10-2 MPa
130~150	10~15	0.15~0.3 MPa	10.0~25.0N/cm

Pressing conditions vary depending on the press machine, so we recommend doing a trial bond each time.

Interfacing for bottoms

Product number	XR22	SUK28	XR11	SX2
Product name	Low-stretch semi-stretch interfacing for shirts and parts, 50D middle type	Super Keep strong-adhesive wide width interfacing	Low-stretch semi-stretch interfacing for shirts and parts, hard type	Woven hard interfacing for blouses and shirts 45/
Thumbnail
Type	Semi-stretch type	Semi-stretch type	Semi-stretch type	Hard type
Material	100% polyester	100% polyester	100% polyester	65% polyester 35% cotton
Suitable face fabric	Bottom fabrics (cotton gabardine, heavy satin, etc.)	Bottom fabrics (cotton gabardine, heavy satin, etc.)	Bottom fabrics (cotton gabardine, heavy satin, etc.)	Bottom fabrics (cotton gabardine, heavy satin, etc.)
Stiffness	Medium	Medium	Hard	Hard
Color variations	14 colors	6 colors	14 colors	3 colors
Specification	112cm×50m	128cm×50m	95cm×50m	89/92cm×60m

* Horizontal scrolling is possible.

* The above information is for reference only. Please check the actual product before use.

Category	Interfacing
Subcategory	Fusible Interlining
Gender	Unisex
Intended Use	General Purpose
Color / Pattern	Solid
Style	PANT, SHIRT


Specification	128cm×50m
Material	100% polyester E
Handling	When processing the product, please check the processing conditions in advance and we recommend testing with a sample. Please thoroughly confirm the condition after processing using a sample before proceeding.
Brand / Manufacturer	Nittobo Advantex

Share This Item

FAQ

Frequently asked questions about this product:

What are the standard sizes for inside belt interfacing used in men's garments?

33 mm, 38 mm.

What kind of problem is kiratsuki?

It is the phenomenon of resin sparkling through the gaps in the weave of the face fabric.
Materials with a loose weave and dark-colored lightweight fabrics are especially noticeable, so using colored resin will resolve it.

What kind of problem is bleed-through?

A state where adhesive resin seeps through to the outer fabric, impairing the fabric’s hand.
As a solution, choose one with a smaller adhesive resin particle size.

What does the D (denier) in 20D or 30D mean?

Denier is a unit used for filament yarn (continuous filament fiber)*, indicating the weight per 9,000 m. If 9,000 m weighs 1 g, it is 1 denier; if it weighs 50 g, it is 50 denier.
The higher the denier count, the thicker the thread and the heavier the fabric.

What kind of problem is bubbling?

A condition where fine air bubbles appear to be trapped between the outer fabric and interlining. It occurs because the compatibility between the fabric and interlining is poor. It may be resolved by choosing an interlining with vertical and horizontal stretch.

What kind of problem is fading?

It is when the uneven texture of the resin pellets becomes clearly visible on the surface of the outer textile. The solution is to choose interfacing with smaller resin dots.

What is the difference between single-dot and double-dot fusible interlining?

It is a difference in the adhesive coating method.
Single dot is made by solidifying fine powdered adhesive and transferring it in a dotted pattern onto the base fabric.
Because the adhesive is fine, it is less likely to bleed through thin materials and less likely to cause fading.
Double dot has a two-layer structure, with a gel-like adhesive forming the base and powdered adhesive layered on top of it.
It provides strong adhesion for a wide range of materials.

What is the difference between the whites such as KW, OW, W, and Y in fusible interlining colors?

The color notation varies by product number, but KW and W are fluorescent white, and Y and OW are off-white.
Fluorescent white is a whiter, purer white.

Can interfacing be shipped rolled on a tube?

Basically, orders of 5 m or more will be shipped wound on a tube.

How should I choose interfacing?

The appropriate interlining varies depending on the face fabric material, thickness, and area of use, so we cannot give a single answer.
Please contact us via inquiries with the face fabric material, area of use (neckline, body, etc.), and desired hand feel.

If you can provide the face fabric, we can perform an adhesion test. Please request this from Interlining Adhesion Test.
By performing an adhesion test, you can find out in advance things like adhesive strength and changes in appearance.