ApparelX is a global B2B marketplace for fabrics and apparel materials.

Multiple shopping bags are now available Details

IF7163D Lining And Interfacing Dual-Use New Material Chambray Standard Type Dark Color (Lightweight) Nittobo Advantex

IF7163D

Lining And Interfacing Dual-Use New Material Chambray Standard Type Dark Color (Lightweight)

ApparelX ID:1071605

There are no reviews yet.

This is a new chambray-type material for both lining and interlining that makes you want to show the reverse side as well. By using special yarns and different colors for the warp thread and weft thread, it achieves the complex, distinctive color and luster of chambray. It easily adds a decorative touch to standard outer fabrics. Thanks to Nittobo's special technology, it is a material that makes single-layer construction possible. Simply press-bond it to your chosen outer fabric with a press machine, and it can add the functions of fusible interlining, such as shape retention, improved sewability, and added body-holding power, while also adding lining functions such as improved comfort and reinforcement of the outer fabric. It is a new accessory material. In addition, when making bonding materials, the bonding material setup and process are required, but because bonding can be done at the sewing factory, improved productivity can be expected. Since single-layer construction is possible, shortening of pattern making and sewing processes can also be expected.

*If ordering by the roll, enter 50 as the quantity.

Set roll quantity

Brand / Manufacturer:Nittobo Advantex

Supplier:Okura Shoji Co., Ltd.

Color:Please select

Stock Status(*):Displayed after account registration

Per Meter(M)

Qty.

Ask About This Product

Color

Please select a color:

BBL7

Black

BNA8

Navy

BOR6

Red

BWH5

グレー

Order Remarks

Add a note for the supplier or for your own reference:

Enter Order Remarks

Order Sample Book

Order a sample book here:

*Note: Sample Book Item will be added to your cart. Remove it from your cart if you do not need it. Your order notes will also be applied to the sample book.

IF7163/IF7163D

Sample Card

Product Description

Set roll quantity

Pressing conditions
・Flat type

Temperature	130~150℃
Time	12〜15 sec
Pressure	2.0〜3.0x10-²MPa

・Roller type

Temperature	120℃〜140℃
Time	10〜15 sec
Pressure	0.2〜0.3MPa(10.0〜25.0N/cm)

* Pressing conditions vary depending on the pressing machine, so we recommend test application each time.

Category	Interfacing
Subcategory	Fusible Interlining
Intended Use	General Purpose
Weave	Taffeta
Color / Pattern	Solid


Specification	Specification: 135cmx50m Count: 30dtex x 33dtex Adhesive points: W26P
Material	100% polyester E
Handling	- The slipperiness and pilling condition of the Innovative Fabric surface may vary depending on compatibility with the outer fabric. Please thoroughly check by adhesion testing and wear testing, and consider the specifications in light of your customer quality standards. - Because soft processed yarn is used, if strong force is applied to the seams, stitch opening and seam slippage may become noticeable. - Because of the special dyeing method, slight color differences may occur. Use within the same lot and cut in one direction within a garment is recommended.
Brand / Manufacturer	Nittobo Advantex
Mailbox Delivery	Not Possible
Registration Date	2019/03/19

Share This Item

FAQ

Frequently asked questions about this product:

What are the standard sizes for inside belt interfacing used in men's garments?

33 mm, 38 mm.

What kind of problem is kiratsuki?

It is the phenomenon of resin sparkling through the gaps in the weave of the face fabric.
Materials with a loose weave and dark-colored lightweight fabrics are especially noticeable, so using colored resin will resolve it.

What kind of problem is bleed-through?

A state where adhesive resin seeps through to the outer fabric, impairing the fabric’s hand.
As a solution, choose one with a smaller adhesive resin particle size.

What does the D (denier) in 20D or 30D mean?

Denier is a unit used for filament yarn (continuous filament)* and refers to the weight per 9,000 m. If 9,000 m weighs 1 g, that is 1 denier; if it weighs 50 g, that is 50 denier.
The higher the denier count, the thicker the yarn and the heavier the fabric.

What kind of problem is bubbling?

A condition where fine air bubbles appear to be trapped between the outer fabric and interlining. It occurs because the compatibility between the fabric and interlining is poor. It may be resolved by choosing an interlining with vertical and horizontal stretch.

What kind of problem is fading?

It is when the uneven texture of the resin pellets becomes clearly visible on the surface of the outer textile. The solution is to choose interfacing with smaller resin dots.

What is the difference between single-dot and double-dot fusible interlining?

It is a difference in the adhesive coating method.
Single dot is made by solidifying fine powdered adhesive and transferring it in a dotted pattern onto the base fabric.
Because the adhesive is fine, it is less likely to bleed through thin materials and less likely to cause fading.
Double dot has a two-layer structure, with a gel-like adhesive forming the base and powdered adhesive layered on top of it.
It provides strong adhesion for a wide range of materials.

What is the difference between the whites such as KW, OW, W, and Y in fusible interlining colors?

The color notation varies by product number, but KW and W are fluorescent white, and Y and OW are off-white.
Fluorescent white is a whiter, purer white.

How should I choose interfacing?

The appropriate interlining varies depending on the face fabric material, thickness, and area of use, so we cannot give a single answer.
Please contact us via inquiries with the face fabric material, area of use (neckline, body, etc.), and desired hand feel.

If you can provide the face fabric, we can perform an adhesion test. Please request this from Interlining Adhesion Test.
By performing an adhesion test, you can find out in advance things like adhesive strength and changes in appearance.

Can interfacing be shipped rolled on a tube?

Basically, orders of 5 m or more will be shipped wound on a tube.