ApparelX is a global B2B marketplace for fabrics and apparel materials.

Multiple shopping bags are now available Details

TC777 Regular Type Spun Woven Interlining[Interfacing]

TC777

Regular Type Spun Woven Interlining

ApparelX ID:1106488

There are no reviews yet.

Versatile lightweight type.
Excellent moisture retention.
Compatible with 110 cm width, allowing efficient pattern layout.

※For roll orders, enter 50 as the quantity.

Set roll quantity

※1 roll is 50 m random. The actual meterage will be notified at the time of shipment.

Brand / Manufacturer:

Supplier:Okura Shoji Co., Ltd.

Color:Please select

Stock Status(*):Displayed after account registration

Per Meter(M)

Qty.

Ask About This Product

Color

Please select a color:

Order Remarks

Add a note for the supplier or for your own reference:

Enter Order Remarks

Product Description

Versatile lightweight type.
Excellent moisture retention.
Compatible with 110 cm width, allowing efficient pattern layout.

※For roll orders, enter 50 as the quantity.

Set roll quantity

※1 roll is 50 m random. The actual meterage will be notified at the time of shipment.

Standard bonding conditions
・Flat type

Temperature	140℃
Time	10–12 seconds
Pressure	0.2–0.3kgf/cm²

・Roller type

Temperature	130–140℃
Time	10–12 seconds
Pressure	1.5–2.0kgf/cm²

Category	Interfacing
Subcategory	Fusible Interlining
Gender	Unisex
Intended Use	General Purpose


Specification	Width: 110cm x 50m random
Material	65% cotton 35% polyester E CO
Handling	Please confirm the appropriate bonding conditions using the same textile before actual bonding.
Mailbox Delivery	Possible
Registration Date	2026/04/03

Share This Item

FAQ

Frequently asked questions about this product:

What are the standard sizes for inside belt interfacing used in men's garments?

33 mm, 38 mm.

What kind of problem is kiratsuki?

It is the phenomenon of resin sparkling through the gaps in the weave of the face fabric.
Materials with a loose weave and dark-colored lightweight fabrics are especially noticeable, so using colored resin will resolve it.

What kind of problem is bleed-through?

A state where adhesive resin seeps through to the outer fabric, impairing the fabric’s hand.
As a solution, choose one with a smaller adhesive resin particle size.

What does the D (denier) in 20D or 30D mean?

Denier is a unit used for filament yarn (continuous filament)* and refers to the weight per 9,000 m. If 9,000 m weighs 1 g, that is 1 denier; if it weighs 50 g, that is 50 denier.
The higher the denier count, the thicker the yarn and the heavier the fabric.

What kind of problem is bubbling?

A condition where fine air bubbles appear to be trapped between the outer fabric and interlining. It occurs because the compatibility between the fabric and interlining is poor. It may be resolved by choosing an interlining with vertical and horizontal stretch.

What kind of problem is fading?

It is when the uneven texture of the resin pellets becomes clearly visible on the surface of the outer textile. The solution is to choose interfacing with smaller resin dots.

What is the difference between single-dot and double-dot fusible interlining?

It is a difference in the adhesive coating method.
Single dot is made by solidifying fine powdered adhesive and transferring it in a dotted pattern onto the base fabric.
Because the adhesive is fine, it is less likely to bleed through thin materials and less likely to cause fading.
Double dot has a two-layer structure, with a gel-like adhesive forming the base and powdered adhesive layered on top of it.
It provides strong adhesion for a wide range of materials.

What is the difference between the whites such as KW, OW, W, and Y in fusible interlining colors?

The color notation varies by product number, but KW and W are fluorescent white, and Y and OW are off-white.
Fluorescent white is a whiter, purer white.

How should I choose interfacing?

The appropriate interlining varies depending on the face fabric material, thickness, and area of use, so we cannot give a single answer.
Please contact us via inquiries with the face fabric material, area of use (neckline, body, etc.), and desired hand feel.

If you can provide the face fabric, we can perform an adhesion test. Please request this from Interlining Adhesion Test.
By performing an adhesion test, you can find out in advance things like adhesive strength and changes in appearance.

TC777 Regular Type Spun Woven Interlining

Unit

Size

Color

Extension Key

Stock List

Order Remarks

Option

Product Description

FAQ

General Notes

Reviews

Related Items

Customers who viewed this product also viewed

Items from the same category

More from This Brand or Manufacturer

TC777

Regular Type Spun Woven Interlining