ApparelX is a global B2B marketplace for fabrics and apparel materials.

›
R444W

R444W Volume Hard Interfacing For Difficult-to-Bond Materials 100D Nittobo Advantex

R444W

Volume Hard Interfacing For Difficult-to-Bond Materials 100D

Name: Volume Hard Interfacing For Difficult-to-Bond Materials 100D
Brand: Nittobo Advantex
SKU: 1021380
Rating: 5 (1 reviews)

ApparelX ID:1021380

For this product, C/#Y is out of stock, so the next expected arrival is around mid-June.

Customers wishing to place an order, please contact us from here before ordering.

[Features]
・Because it has a special dot coating, it adheres more easily to hard-to-bond materials such as velvet.
・Because it uses thick yarn, it provides a moderate firmness and body and offers excellent shape retention.
・It can also be used as a structural interfacing for parts such as belt interlining.
・It has a wide 122 cm width design, allowing for more efficient pattern layout.

Brand / Manufacturer:Nittobo Advantex

Supplier:

Color:Please select

Stock Status(*):Displayed after account registration

*Excl. tax

Qty.

Ask About This Product

Color

Please select a color:

Black

Order Remarks

Add a note for the supplier or for your own reference:

Enter Order Remarks

Order Sample Book

Order a sample book here:

*Note: Sample Book Item will be added to your cart. Remove it from your cart if you do not need it. Your order notes will also be applied to the sample book.

SAMPLE

Sample Card

Product Description

For this product, C/#Y is out of stock, so the next expected arrival is around mid-June.

Customers wishing to place an order, please contact us from here before ordering.

Pressing conditions
・Flat type

Temperature	120~140℃
Time	10〜15 sec
Pressure (gauge pressure)	2.0〜3.0 x 10-²MPa()
Pressure (gauge pressure)	(0.2〜0.3kgf/cm2)

・Roller type

Temperature	120℃〜140℃
Time	10〜12 sec
Pressure (gauge pressure)	0.15〜0.3MPa
Pressure (gauge pressure)	(1.5〜3.0kgf/cm2)
Pressure (line pressure)	11.6〜22.1N/cm

* Pressing conditions vary depending on the pressing machine, so we recommend test application each time.

Category	Interfacing
Subcategory	Fusible Interlining
Gender	Unisex
Intended Use	General Purpose
Style	JACKET, OUTER, PANT


Country of Origin	Japan
Specification	Specification: 122cm × 50m Color variation: Y / 30 Suitable items: Fronts / facings / parts for jackets, coats, and blousons Suitable face materials: Difficult-to-bond materials such as velvet / natural to blended and synthetic materials
Material	100% polyester E
Brand / Manufacturer	Nittobo Advantex

Share This Item

FAQ

Frequently asked questions about this product:

Are R444W and R444 the same product?

R444 has been discontinued, and has now been replaced by R444W (wide width type).
The interlining itself is the same product.

What are the standard sizes for inside belt interfacing used in men's garments?

33 mm, 38 mm.

What kind of problem is kiratsuki?

It is the phenomenon of resin sparkling through the gaps in the weave of the face fabric.
Materials with a loose weave and dark-colored lightweight fabrics are especially noticeable, so using colored resin will resolve it.

What kind of problem is bleed-through?

A state where adhesive resin seeps through to the outer fabric, impairing the fabric’s hand.
As a solution, choose one with a smaller adhesive resin particle size.

What does the D (denier) in 20D or 30D mean?

Denier is a unit used for filament yarn (continuous filament fiber)*, indicating the weight per 9,000 m. If 9,000 m weighs 1 g, it is 1 denier; if it weighs 50 g, it is 50 denier.
The higher the denier count, the thicker the thread and the heavier the fabric.

What kind of problem is bubbling?

A condition where fine air bubbles appear to be trapped between the outer fabric and interlining. It occurs because the compatibility between the fabric and interlining is poor. It may be resolved by choosing an interlining with vertical and horizontal stretch.

What kind of problem is fading?

It is when the uneven texture of the resin pellets becomes clearly visible on the surface of the outer textile. The solution is to choose interfacing with smaller resin dots.

What is the difference between single-dot and double-dot fusible interlining?

It is a difference in the adhesive coating method.
Single dot is made by solidifying fine powdered adhesive and transferring it in a dotted pattern onto the base fabric.
Because the adhesive is fine, it is less likely to bleed through thin materials and less likely to cause fading.
Double dot has a two-layer structure, with a gel-like adhesive forming the base and powdered adhesive layered on top of it.
It provides strong adhesion for a wide range of materials.

What is the difference between the whites such as KW, OW, W, and Y in fusible interlining colors?

The color notation varies by product number, but KW and W are fluorescent white, and Y and OW are off-white.
Fluorescent white is a whiter, purer white.

Can interfacing be shipped rolled on a tube?

Basically, orders of 5 m or more will be shipped wound on a tube.

How should I choose interfacing?

The appropriate interlining varies depending on the face fabric material, thickness, and area of use, so we cannot give a single answer.
Please contact us via inquiries with the face fabric material, area of use (neckline, body, etc.), and desired hand feel.

If you can provide the face fabric, we can perform an adhesion test. Please request this from Interlining Adhesion Test.
By performing an adhesion test, you can find out in advance things like adhesive strength and changes in appearance.

General Notes

Please confirm the following general notes regarding items at this site:

Zipper | Payment when you choose 'Fast Delivery'

If we cut a longer zipper to the length you want, the price will be changed.

Please make a payment after the price is fixed, in the case of Bank Transfer.

*** In the case of Credit Card, we will charge the extra after the price is fixed.

Product image disclaimer

Product images may not accurately represent actual colors. For bulk production, confirm the color using a physical sample.

Payment for Full-Roll Fabric Orders

The exact length of a full fabric roll may vary. We will notify you once the final length is confirmed.

*** For bank transfers, please pay after the final length is confirmed.

*** For credit card payments, any additional amount will be charged after the final length is confirmed.

Need help? Visit our Support page

Reliable: 75 Years in the Industry

MOQ: From 1 Meter, 1 Piece, 1 Set

Flexible Shipping Option: DHL, EMS, etc.

Credit Cards / Wallets / On Account

Reviews

See reviews from other customers.

Share your experience by posting a review.

MESS

Purchased at ApparelX

Good hardness

Nov 20, 2024

Color:30

Purchased for use in the pocket openings of sweatshirts and nylon pants.
If the pocket openings of soft materials are not secure, they will sag when worn, but with this hardness they don't sag and are perfect.