ApparelX is a global B2B marketplace for fabrics and apparel materials.

Your card is now charged when your order ships Details

New: choose your delivery company at checkout Details

›
R801

R801 Danrène Low-Temperature Fusible Stretch Interfacing, Sharp Type, 30D Nittobo Advantex

R801

Danrène Low-Temperature Fusible Stretch Interfacing, Sharp Type, 30D

Name: Danrène Low-Temperature Fusible Stretch Interfacing, Sharp Type, 30D
Brand: Nittobo Advantex
SKU: 1021411
Rating: 4 (1 reviews)

ApparelX ID:1021411

With vertical and horizontal stretch, it follows movement exceptionally well.
Because it uses a special polyamide-based adhesive, bonding is possible even at low pressing temperatures.
Suitable for outer fabrics that are sensitive to heat.
As the outer fabric is delicate, please be careful of any changes to the fabric surface after pressing.
Suitable outer fabrics: leather, synthetic leather, artificial leather, and other heat-sensitive materials

Brand / Manufacturer:Nittobo Advantex

Supplier:Okura Shoji Co., Ltd.

Color:Please select

Stock Status(*):Displayed after account registration

Per Meter(M)

Qty.

Ask About This Item

Color

Please select a color:

Black

Stock Status

Stock levels change frequently. Contact us if you need confirmed availability.
Products shipped from the brand or manufacturer's warehouse may require additional delivery time.
If an item is found to be out of stock after you place your order, we will cancel it (if you have already paid, we will issue a refund).

Combine stock from multiple locations

Color	Stock Location	Available Quantity
30 Black	Own warehouse	47m
Y	Own warehouse	19m

*Last updated:Oct 22, 2026, 15:58

Order Memo

Add a note for the supplier or for your own reference:

Enter Memo

Order Sample Book

Order a sample book here:

*Note: The sample book below will be added to your cart. If you do not need it, remove it on the Cart page. Its memo is pre-filled with the item code and name from this page.

R800/R801SAMPLE

Sample Card

Item Description

Pressing conditions
・Flat type

Temperature	80~120℃
Time	10~15 sec
Pressure	2.0~3.0x10-²MPa(0.2~0.3kgf/cm²)

・Roller type

Temperature	80~110℃
Time	10~12 sec
Pressure (gauge pressure)	0.15~0.3MPa(1.5~3.0kgf/cm²)
Pressure (line pressure)	11.6~22.1N/cm

* Pressing conditions vary depending on the pressing machine, so we recommend testing the bonding each time.

Product number	R5005	R8500	R8800	R8801	R800	R801
Product name	Danryne thin water-repellent coating material compatible high-adhesion & resin-fading, anti-gloss SDDC fusible interfacing 20D	Danryne thin water-repellent coating material compatible resin-fading prevention SDDC fusible interfacing, soft standard 20D	Danryne low-temperature fusible, shape-retention, hard-to-bond material compatible resin-fading prevention SDDC fusible interfacing 20D	Low-temperature fusible, shape-retention, hard-to-bond material compatible resin-fading prevention SDDC fusible interfacing	Danryne low-temperature fusible stretch interfacing, soft type 20D	Danryne low-temperature fusible stretch interfacing, sharp type 30D
Thumbnail
Hand feel	Thin, light, soft	Soft standard	Thin and natural	Natural and firm	Thin and soft	Standard
Recommended items	Blouses, jackets, coats, etc.	Blouses, jackets, coats, etc., from light to heavy garments	Blouses, jackets, coats, etc., from light to heavy garments	Blouses, jackets, coats, etc., from light to heavy garments	Fronts, facings, parts	Fronts, facings, parts
Suitable face fabric	Thin water-repellent coating materials, taffeta, linings, etc.	Thin water-repellent coating materials	Delicate materials requiring low-temperature fusible bonding to shape-retention and other hard-to-bond materials	Delicate materials requiring low-temperature fusible bonding to shape-retention and other hard-to-bond materials	All heat-sensitive materials such as leather, faux leather, and synthetic leather	All heat-sensitive materials such as leather, faux leather, and synthetic leather
Specification	112cm×50m	122cm×50cm	122cm×50m	122cm×50m	92cm×50m	92cm×50m

* Horizontal scrolling is possible.

* The above information is for reference only. Please check the actual product before use.

Category	Interfacing
Subcategory	Fusible Interlining
Gender	Unisex
Intended Use	General Purpose
Color / Pattern	Solid
Style	For Outerwear/blousons/coats, For Jackets/Suits, For Bags, For Interiors


Country of Origin	Japan
Specification	Specification: 92 cm × 50 m
Material	100% polyester E
Hand feelAI	StretchSome stretchCrosswise stretch SurfaceCoated AI estimate from the product video and data. The actual fabric may differ.
Handling	Suitable items: jackets/blousons, front, facing, parts
Brand / Manufacturer	Nittobo Advantex
Listed on ApparelX	10/18/2019

Share This Item

FAQ

Frequently asked questions about this product:

What are the standard sizes for inside belt interfacing used in men's garments?

33 mm, 38 mm.

What kind of problem is kiratsuki?

It is the phenomenon of resin sparkling through the gaps in the weave of the face fabric.
Materials with a loose weave and dark-colored lightweight fabrics are especially noticeable, so using colored resin will resolve it.

What kind of problem is bleed-through?

A state where adhesive resin seeps through to the outer fabric, impairing the fabric’s hand.
As a solution, choose one with a smaller adhesive resin particle size.

What does the D (denier) in 20D or 30D mean?

Denier is a unit used for filament yarn (continuous filament)* and refers to the weight per 9,000 m. If 9,000 m weighs 1 g, that is 1 denier; if it weighs 50 g, that is 50 denier.
The higher the denier count, the thicker the yarn and the heavier the fabric.

What kind of problem is bubbling?

A condition where fine air bubbles appear to be trapped between the outer fabric and interlining. It occurs because the compatibility between the fabric and interlining is poor. It may be resolved by choosing an interlining with vertical and horizontal stretch.

What kind of problem is fading?

It is when the uneven texture of the resin pellets becomes clearly visible on the surface of the outer fabric. The solution is to choose interfacing with smaller resin dots.

What is the difference between single-dot and double-dot fusible interlining?

It is a difference in the adhesive coating method.
Single dot is made by solidifying fine powdered adhesive and transferring it in a dotted pattern onto the base fabric.
Because the adhesive is fine, it is less likely to bleed through thin materials and less likely to cause fading.
Double dot has a two-layer structure, with a gel-like adhesive forming the base and powdered adhesive layered on top of it.
It provides strong adhesion for a wide range of materials.

What is the difference between the whites such as KW, OW, W, and Y in fusible interlining colors?

The color notation varies by product number, but KW and W are fluorescent white, and Y and OW are off-white.
Fluorescent white is a whiter, purer white.

How should I choose interfacing?

The appropriate interlining varies depending on the face fabric material, thickness, and area of use, so we cannot give a single answer.
Please contact us via inquiries with the face fabric material, area of use (neckline, body, etc.), and desired hand feel.

If you can provide the face fabric, we can perform an adhesion test. Please request this from Interlining Adhesion Test.
By performing an adhesion test, you can find out in advance things like adhesive strength and changes in appearance.

Can interfacing be shipped rolled on a tube?

Basically, orders of 5 m or more will be shipped wound on a tube.

General Notes

Please confirm the following general notes regarding items at this site:

Zippers | Payment When Delivery Time Is Prioritized

We may shorten a longer zipper to the length you need. In that case, the unit price may change.

*** For bank transfers, please pay after the unit price is confirmed.

*** For credit card payments, please make an additional payment after the unit price is confirmed.

About Item Images

Screens cannot reproduce the actual texture or sheen of fabrics and other items, and colors may look slightly different depending on your monitor. We are working toward a world where physical sample books are no longer needed, but for bulk production orders we recommend purchasing a sample book to check the actual item.

Payment for Full-Roll Fabric Orders

The exact length of a full fabric roll may vary. We will notify you once the final length is confirmed.

*** For bank transfers, please pay after the final length is confirmed.

*** For credit card payments, we charge the confirmed length after the final length is confirmed (if it increases, we will ask for an additional payment; for payment methods charged when you place the order, we refund the difference if it decreases).

Need help? Visit our Support page

Reliable: 75 Years in the Industry

MOQ: From 1 Meter, 1 Piece, 1 Set

Flexible Shipping Option: DHL, EMS, etc.

Credit Cards / Wallets / On Account

Reviews

See reviews from other customers.

Share your experience by posting a review.

MMT

Purchased at ApparelX

Can also be used for laser

Apr 20, 2023

Color: BK

Since it can be adhered at low temperatures, it is used as an fusible interlining for leather.
It has a moderate thickness without compromising the texture of the leather.

Detailed Ratings:

Thickness

Handling

3 found this helpful