ApparelX is a global B2B marketplace for fabrics and apparel materials.

R5005 Danrene Interlining 20D For Thin Water-Repellent Coated Materials, High-Adhesion & Anti-Fading, Anti[Interfacing] Nittobo Advantex

R5005

Danrene Interlining 20D For Thin Water-Repellent Coated Materials, High-Adhesion & Anti-Fading, Anti

ApparelX ID:1021384

Uses Nittobo’s original special resin, which provides strong adhesion even to difficult-to-bond water-repellent coated materials.
By combining SDDC technology with a special resin, it is highly effective at preventing resin fading and bleed-through.
Recommended for thin, difficult-to-bond materials such as lining fabrics.
Available in a wide range of colors.
Soft standard type
SDDC is Nittobo’s technology for ultra-fine, high-performance adhesion. By using finer resin particles, it prevents bleed-through, resin fading, and surface sheen on thin outer fabrics while delivering strong adhesion.

Brand / Manufacturer:Nittobo Advantex

Supplier:

Color:Please select

Stock Status(*):Displayed after account registration

*Excl. tax

Qty.

Ask About This Product

Color

Please select a color:

Black

121

122

267

879

White

Off White

Order Remarks

Add a note for the supplier or for your own reference:

Enter Order Remarks

Order Sample Book

Order a sample book here:

*Note: Sample Book Item will be added to your cart. Remove it from your cart if you do not need it. Your order notes will also be applied to the sample book.

SAMPLE

Sample Card

Product Description

Press conditions
・Flat type

Temperature	130～150°C
Time	10〜15 seconds
Pressure	2.0〜3.0x10-²MPa(0.2〜0.3kgf/cm²)

・Roller type

Temperature	120°C〜140°C
Time	10〜12 seconds
Pressure	0.15〜0.3MPa(1.5〜3.0kgf/cm²)

* Press conditions vary depending on the press machine, so we recommend a test application each time

Product number	R5005	R8500	R8800	R8801	R800	R801
Product name	Danrene SDDC interlining for thin water-repellent coated materials, high adhesion & anti-fading, anti-gloss, 20D	Danrene SDDC interlining for thin water-repellent coated materials, anti-fading resin, soft standard, 20D	Danrene SDDC interlining for low-temperature bonding, shape-memory, hard-to-bond materials, anti-fading resin, 20D	SDDC interlining for low-temperature bonding, shape-memory, hard-to-bond materials, anti-fading resin	Danrene stretch interlining, low-temperature bondable, soft type, 20D	Danrene stretch interlining, low-temperature bondable, sharp type, 30D
Thumbnail
Hand feel	Thin, light, soft	Soft standard	Thin and natural	Natural and firm	Thin and soft	Standard
Recommended items	Blouses, jackets, coats, etc.	Blouses, jackets, coats, etc., from lightweight to heavy-weight garments	Blouses, jackets, coats, etc., from lightweight to heavy-weight garments	Blouses, jackets, coats, etc., from lightweight to heavy-weight garments	Fronts, facings, parts	Fronts, facings, parts
Suitable face fabrics	Thin water-repellent coated materials, taffeta, lining, etc.	Thin water-repellent coated materials	Delicate materials requiring low-temperature bonding to hard-to-bond materials such as shape-memory fabrics	Delicate materials requiring low-temperature bonding to hard-to-bond materials such as shape-memory fabrics	All heat-sensitive materials such as leather, synthetic leather, and artificial leather	All heat-sensitive materials such as leather, synthetic leather, and artificial leather
Specification	112cm×50m	122cm×50cm	122cm×50m	122cm×50m	92cm×50m	92cm×50m

*Horizontal scrolling is available.

*The above information is for reference only. Please check the actual product before use.

Interlining for thin fabrics and water-repellent coated materials

Product number	R5001	R5005	R5115	R5015
Item name	SDDC Series Interlining for Water-Repellent and Coated Materials	Danreine High-Adhesion & Resin Fading and Glare-Prevention SDDC Interlining for Thin Water-Repellent Coated Materials 20D	SDDC Series Interlining for Water-Repellent and Coated Materials	SDDC Series Interlining for Water-Repellent and Coated Materials ApparelX ID:1021386
Thumbnail
Hand feel	Extra-thin, lightweight type	Soft standard type	Curled type for nylon materials, transparent soft	Natural hard type
Material	polyester 100%	polyester 100%	nylon 100%	polyester 100%
Suitable items	Blouses, jackets, coats, etc.	Blouses, jackets, coats, etc.	Blouses, jackets, coats, etc.	Blouses, jackets, coats, etc.
Suitable outer fabrics	Thin to thick / natural to synthetic / water-repellent coated materials	Thin to thick / natural to synthetic / water-repellent coated materials	Thin to thick / natural to synthetic / water-repellent coated materials	Thin to thick / natural to synthetic / water-repellent coated materials
Firmness	Soft	Medium	Medium	Hard
Thickness	11D	20D	15D	30D
Color variations	11	14	11	11
Specification	112cm×50m	112cm×50m	92cm×50m	112cm×50m

* Can be scrolled horizontally.

* The above information is for reference only; please check the actual product before use.

Category	Interfacing
Subcategory	Fusible Interlining
Gender	Women's
Intended Use	General Purpose
Weave	Taffeta
Color / Pattern	Solid
Style	DRESS, FUNCTIONAL, JACKET, OUTDOOR, OUTER, PANT, SHIRT, SKIRT, SUSTAINABLE, UNIFORM


Specification	Specification: 112cm × 50m
Material	100% polyester E
Handling	Suitable materials: Thin to thick Natural to synthetic Water-repellent coated materials Taffeta, lining, etc.
Brand / Manufacturer	Nittobo Advantex

Share This Item

FAQ

Frequently asked questions about this product:

What are the standard sizes for inside belt interfacing used in men's garments?

33 mm, 38 mm.

What kind of problem is kiratsuki?

It is the phenomenon of resin sparkling through the gaps in the weave of the face fabric.
Materials with a loose weave and dark-colored lightweight fabrics are especially noticeable, so using colored resin will resolve it.

What kind of problem is bleed-through?

A state where adhesive resin seeps through to the outer fabric, impairing the fabric’s hand.
As a solution, choose one with a smaller adhesive resin particle size.

What does the D (denier) in 20D or 30D mean?

Denier is a unit used for filament yarn (continuous filament fiber)*, indicating the weight per 9,000 m. If 9,000 m weighs 1 g, it is 1 denier; if it weighs 50 g, it is 50 denier.
The higher the denier count, the thicker the thread and the heavier the fabric.

What kind of problem is bubbling?

A condition where fine air bubbles appear to be trapped between the outer fabric and interlining. It occurs because the compatibility between the fabric and interlining is poor. It may be resolved by choosing an interlining with vertical and horizontal stretch.

What kind of problem is fading?

It is when the uneven texture of the resin pellets becomes clearly visible on the surface of the outer textile. The solution is to choose interfacing with smaller resin dots.

What is the difference between single-dot and double-dot fusible interlining?

It is a difference in the adhesive coating method.
Single dot is made by solidifying fine powdered adhesive and transferring it in a dotted pattern onto the base fabric.
Because the adhesive is fine, it is less likely to bleed through thin materials and less likely to cause fading.
Double dot has a two-layer structure, with a gel-like adhesive forming the base and powdered adhesive layered on top of it.
It provides strong adhesion for a wide range of materials.

What is the difference between the whites such as KW, OW, W, and Y in fusible interlining colors?

The color notation varies by product number, but KW and W are fluorescent white, and Y and OW are off-white.
Fluorescent white is a whiter, purer white.

Can interfacing be shipped rolled on a tube?

Basically, orders of 5 m or more will be shipped wound on a tube.

How should I choose interfacing?

The appropriate interlining varies depending on the face fabric material, thickness, and area of use, so we cannot give a single answer.
Please contact us via inquiries with the face fabric material, area of use (neckline, body, etc.), and desired hand feel.

If you can provide the face fabric, we can perform an adhesion test. Please request this from Interlining Adhesion Test.
By performing an adhesion test, you can find out in advance things like adhesive strength and changes in appearance.