ApparelX is a global B2B marketplace for fabrics and apparel materials.

R8800 Danrene Low-Temperature Adhesive, Shape-Memory, Suitable For Hard-to-Bond Materials, Resin Fading Pr[Interfacing] Nittobo Advantex

R8800

Danrene Low-Temperature Adhesive, Shape-Memory, Suitable For Hard-to-Bond Materials, Resin Fading Pr

ApparelX ID:1021417

Compared with standard interlinings, this uses a resin that can be bonded at low temperatures. It is ideal for heat-sensitive materials such as shape-memory fabrics.
It can be used for a wide range of fabrics, from lightweight to heavyweight.
SDDC is Nittobo’s technology, meaning ultra-fine, high-performance adhesive technology. By using finer resin particles, it prevents strike-through, resin fading, and surface sheen on even thin outer fabrics, while delivering strong bonding performance.

Brand / Manufacturer:Nittobo Advantex

Supplier:

Color:Please select

Stock Status(*):Displayed after account registration

*Excl. tax

Qty.

Ask About This Product

Color

Please select a color:

Black

Order Remarks

Add a note for the supplier or for your own reference:

Enter Order Remarks

Order Sample Book

Order a sample book here:

*Note: Sample Book Item will be added to your cart. Remove it from your cart if you do not need it. Your order notes will also be applied to the sample book.

SAMPLE

Sample Card

Product Description

Press conditions
・Flat type

Temperature	120~150℃
Time	10〜15 sec
Pressure	2.0〜3.0x10-²MPa(0.2〜0.3kgf/cm²)

・Roller type

Temperature	110℃〜140℃
Time	10〜12 sec
Pressure	0.15〜0.3MPa(1.5〜3.0kgf/cm²)

* Press conditions vary depending on the press machine, so we recommend testing each time.

Product number	R5005	R8500	R8800	R8801	R800	R801
Product name	Dan Rène compatible with thin water-repellent coated materials, high-adhesion & resin fading, anti-glitter SDDC interfacing 20D	Dan Rène compatible with thin water-repellent coated materials, resin fading-preventing SDDC interfacing, soft standard 20D	Dan Rène compatible with low-temperature bonding, shape-retaining, hard-to-bond materials, resin fading-preventing SDDC interfacing 20D	Compatible with low-temperature bonding, shape-retaining, hard-to-bond materials, resin fading-preventing SDDC interfacing	Dan Rène low-temperature bondable stretch interfacing, soft type 20D	Dan Rène low-temperature bondable stretch interfacing, sharp type 30D
Thumbnail
Hand feel	Thin, light, soft	Soft standard	Lightweight, natural	Natural, hard	Lightweight, soft	Standard
Suitable items	Blouses, jackets, coats, etc.	Blouses, jackets, coats, etc., from light to heavy apparel	Blouses, jackets, coats, etc., from light to heavy apparel	Blouses, jackets, coats, etc., from light to heavy apparel	Fronts, facings, parts	Fronts, facings, parts
Suitable outer materials	Thin water-repellent coated materials, taffeta, lining, etc.	Thin water-repellent coated materials	Delicate materials requiring low-temperature bonding to hard-to-bond materials such as shape-retaining fabrics	Delicate materials requiring low-temperature bonding to hard-to-bond materials such as shape-retaining fabrics	All heat-sensitive materials such as leather, synthetic leather, and artificial leather	All heat-sensitive materials such as leather, synthetic leather, and artificial leather
Specification	112cm×50m	122cm×50cm	122cm×50m	122cm×50m	92cm×50m	92cm×50m

* Horizontal scrolling is possible.

* The above information is for reference only. Please confirm the actual item before use.

Category	Interfacing
Subcategory	Fusible Interlining
Gender	Unisex
Intended Use	General Purpose
Weave	Taffeta
Color / Pattern	Solid
Style	JACKET, OUTDOOR, OUTER, PANT, SHIRT, SKIRT, UNIFORM


Specification	Specification: 122 cm × 50 m
Material	100% polyester E
Handling	Suitable materials: heat-sensitive materials
Brand / Manufacturer	Nittobo Advantex

Supplier's Pick

Featured comments from the supplier for this item.

Okura Shoji Co., Ltd. 佐藤雄一

Supplier

Low-temperature fusible interfacing (20d×20d)

Mar 24, 2026

This fusible interlining is for base materials that require low-temperature bonding, such as leather and faux fur.
R8800 is suitable for lightweight materials.
It can be bonded from 110°C.
For materials that are sensitive to heat and prone to surface changes during bonding,
we recommend a low-temperature fusible interlining.
*We recommend conducting a bonding test.

Details:

Functionality

Thickness

Reasonability

Handling

1 found this helpful

Share This Item

FAQ

Frequently asked questions about this product:

What are the standard sizes for inside belt interfacing used in men's garments?

33 mm, 38 mm.

What kind of problem is kiratsuki?

It is the phenomenon of resin sparkling through the gaps in the weave of the face fabric.
Materials with a loose weave and dark-colored lightweight fabrics are especially noticeable, so using colored resin will resolve it.

What kind of problem is bleed-through?

A state where adhesive resin seeps through to the outer fabric, impairing the fabric’s hand.
As a solution, choose one with a smaller adhesive resin particle size.

What does the D (denier) in 20D or 30D mean?

Denier is a unit used for filament yarn (continuous filament fiber)*, indicating the weight per 9,000 m. If 9,000 m weighs 1 g, it is 1 denier; if it weighs 50 g, it is 50 denier.
The higher the denier count, the thicker the thread and the heavier the fabric.

What kind of problem is bubbling?

A condition where fine air bubbles appear to be trapped between the outer fabric and interlining. It occurs because the compatibility between the fabric and interlining is poor. It may be resolved by choosing an interlining with vertical and horizontal stretch.

What kind of problem is fading?

It is when the uneven texture of the resin pellets becomes clearly visible on the surface of the outer textile. The solution is to choose interfacing with smaller resin dots.

What is the difference between single-dot and double-dot fusible interlining?

It is a difference in the adhesive coating method.
Single dot is made by solidifying fine powdered adhesive and transferring it in a dotted pattern onto the base fabric.
Because the adhesive is fine, it is less likely to bleed through thin materials and less likely to cause fading.
Double dot has a two-layer structure, with a gel-like adhesive forming the base and powdered adhesive layered on top of it.
It provides strong adhesion for a wide range of materials.

What is the difference between the whites such as KW, OW, W, and Y in fusible interlining colors?

The color notation varies by product number, but KW and W are fluorescent white, and Y and OW are off-white.
Fluorescent white is a whiter, purer white.

Can interfacing be shipped rolled on a tube?

Basically, orders of 5 m or more will be shipped wound on a tube.

How should I choose interfacing?

The appropriate interlining varies depending on the face fabric material, thickness, and area of use, so we cannot give a single answer.
Please contact us via inquiries with the face fabric material, area of use (neckline, body, etc.), and desired hand feel.

If you can provide the face fabric, we can perform an adhesion test. Please request this from Interlining Adhesion Test.
By performing an adhesion test, you can find out in advance things like adhesive strength and changes in appearance.